Description
A heavy-duty steel wall-mount bracket that securely supports three slim whole-house housings for a 3-stage system — keeping cartridges aligned and stress off your plumbing. Aggressive volume discounts for installers.
What it does
The MyWaterClub Triple Mounting Bracket carries the weight of your 3-stage whole-house filtration system so your inlet and outlet plumbing doesn’t have to. Three slim 10″×2.5″ housings bolt into the bracket and the bracket bolts to the wall — giving you a rock-solid, permanent installation.
Beyond simply holding the housings up, the bracket keeps them parallel and evenly spaced so cartridge changes are quick and clean, and it prevents pipe fatigue over time by taking the load off your compression fittings and unions. Ideal for basements, garages, utility rooms, or any mechanical area where you want the install to look clean and stay put. Also fits many traditional under-sink RO systems that use slim 10″ housings.
Key benefits
- ✓Heavy-duty metal construction — built to hold the weight of three water-filled housings
- ✓Keeps housings parallel and evenly spaced for easier cartridge changes
- ✓Takes the load off inlet/outlet plumbing — reduces stress on fittings and unions
- ✓Clean, professional install — suitable for residential and light commercial use
- ✓Pre-drilled mounting holes for straightforward wall installation
- ✓Fits all MyWaterClub 3-stage slim whole-house systems (3/4″ port)
- ✓Also fits many traditional under-sink RO systems with slim 10″ housings
- ✓Steep bulk discount — $29 each at 1 down to $12 each at 20+ (59% off)
Specifications
| Housings supported |
Three (triple/3-stage) |
| Housing size compatibility |
Slim 10″ × 2.5″ |
| Port size compatibility |
3/4″ |
| Material |
Heavy-duty metal |
| Dimensions |
14 × 6 × 3 in |
| Weight |
3 lbs |
| Mounting hardware |
Not included — supply screws/anchors for your wall type |
| Brand |
MyWaterClub |
| SKU |
BR-3-SLIM |
Compatibility
✓ Works with
- All MyWaterClub 3-stage whole-house systems with slim 10″×2.5″ housings
- Any standard slim 10″ whole-house housing with a 3/4″ port
- Many traditional under-sink RO systems using slim 10″ housings
× Not for
- Big Blue 10″×4.5″ or 20″×4.5″ housings
- 2-stage or single-stage systems (needs a dual or single bracket instead)
- 1″ port housings
Fits these MyWaterClub systems
Installer & plumber bulk pricing
This bracket carries our
steepest volume discount: $29 each at 1, dropping to
$12 each at 20+ (59% off).
Contact us for case-quantity installer pricing beyond that.
Good to know before you buy
- Mounting hardware is not included. Choose screws and wall anchors appropriate for your wall type (wood stud, drywall, masonry, etc.).
- Anchor the bracket into a stud or solid backing whenever possible — three water-filled housings can weigh 20–25 lbs, and toggle-only mounts loosen over time.
- Leave clearance below the housings equal to the cartridge length (about 12″) so you can drop the sumps for filter changes without hitting the floor or a shelf.
- For 2-stage systems, use the dual-slot bracket instead — this one carries three housings.
- Professional installation recommended if you’re cutting into your main water line.
Reviews
There are no reviews yet.