A complete single-stage whole house filtration system that reduces sediment, dirt, sand, silt, rust, and scale particles from your home’s main water line — protecting every faucet, appliance, and fixture. Includes housing, mounting bracket, wrench, and a 5-micron sediment cartridge.

What it is

This is a point-of-entry (whole house) filtration system that installs on your main water line — typically where water enters the home — so every tap, shower, washer, and water-using appliance gets filtered water. The 10″ × 2.5″ slim housing holds a standard sediment cartridge and connects to 3/4″ NPT plumbing.

As a single-stage sediment filter, it’s the essential first line of defense: it captures the particulate — dirt, sand, silt, rust flakes, and scale — that clogs fixtures, wears out appliances, and makes water look or taste gritty. It’s also the ideal pre-filter ahead of a softener, RO system, or additional filtration stages.

Choose your configuration

Both versions fit any standard 10″ × 2.5″ cartridge, so you can swap in a different media at any time. Browse compatible cartridges →

What’s in the box

• ✓10″ × 2.5″ filter housing (blue sump, black/blue cap) with 3/4″ NPT ports & pressure-relief button
• ✓MyWaterClub mounting bracket & screws
• ✓Housing wrench for easy cartridge changes
• ✓5-micron spun-polypropylene sediment cartridge (WHS-1S-1025 only)

Key benefits

• ✓Whole-home coverage — filters water at the point of entry, protecting every tap & appliance
• ✓Reduces sediment — dirt, sand, silt, rust, and scale particles
• ✓Protects appliances — less wear on water heaters, washers, dishwashers & fixtures
• ✓Ideal pre-filter — extends the life of softeners, RO systems & downstream filters
• ✓Upgradeable — swap in carbon, KDF, iron, or scale cartridges anytime
• ✓Easy maintenance — wrench included; cartridge changes take minutes

Specifications

Helps reduce

Want chlorine, taste, or odor reduction? Swap in a carbon cartridge, or add a second stage.

Installation notes

• Install on the main cold-water line at the point of entry, after the main shut-off valve. We recommend a bypass loop so you can service the filter without shutting off the whole house.
• Mount the bracket to a wall stud using the included screws — the housing hangs from the bracket for easy access.
• Use PTFE tape on the 3/4″ NPT threads and confirm flow direction (in → out) marked on the cap.
• Relieve pressure with the button on the cap before opening the housing for a cartridge change.
• Cold water only. Do not install on a hot-water line.
• Professional installation is recommended if you’re not comfortable working on main-line plumbing.

Often used with