Description
Durable rigid-plastic mounting clips that hold standard 2.5″ diameter filter housings and cylindrical components in place. Snap-in design for easy installation and removal during filter changes. 2 clips per pack.
What it does
These 2.5″ × 2.5″ mounting clips wrap around standard 2.5″ diameter filter housings — 10″×2.5″ slim housings, RO membrane housings, and similar cylindrical components — and screw to a wall, cabinet, or panel.
The snap-in design makes it easy to seat and remove the housing during routine filter changes without unscrewing the clips. Rigid, corrosion-resistant plastic — built for long-term, reliable service.
Key benefits
- ✓Fits 2.5″ diameter housings & components
- ✓Snap-in design — easy housing removal during filter changes
- ✓Rigid, corrosion-resistant plastic
- ✓Horizontal or vertical mounting
- ✓Works with whole house, RO, under-sink & DIY setups
- ✓2 clips per pack with quantity discounts
Specifications
| Compatibility |
2.5″ diameter filter housings & cylindrical components |
| Clip size |
2.5″ × 2.5″ |
| Material |
Rigid plastic, corrosion-resistant |
| Mounting |
Wall or panel mount (hardware not included) |
| Quantity |
2 clips per pack |
| Dimensions |
3 × 2 × 1 in |
| Weight |
0.2 lbs |
| Brand |
MyWaterClub |
| SKU |
CL-25-25 |
Compatibility
✓ Works with
- Standard 2.5″ diameter filter housings (10″×2.5″ slim)
- RO membrane housings
- Whole house, RO, under-sink & DIY installations
× Not for
- Big Blue 10″×4.5″ housings (too large)
- Components smaller than 2.5″ diameter
Often used with
Good to know before you buy
- Two clips per housing — position one near each end.
- Secure to a solid surface with appropriate screws (not included).
- Snap the housing into the mounted clips; it should hold firmly.
- Verify tubing connections are not under stress after mounting.
Reviews
There are no reviews yet.