SKU: HQCBC-10-5 Category: Brand:

Coconut Shell Carbon Block Water Filter Cartridge — NSF-Certified, 5 Micron, (HQCBC-10-5), 10″ × 2.5″ (9 7/8″x2.5″)

$8.99

Description

NSF-certified coconut-shell carbon block from PURETA — 5-micron filtration that reduces chlorine, taste, odor, and organic compounds for exceptionally clean water.

Stage
Final · Polishing
Size
10″ × 2.5″
Micron
5 µm
Certified
NSF/ANSI 42*
Fits
Standard 10″ housings

What it does

The PURETA HQCBC-10-5 is a coconut-shell activated carbon block rated at 5 microns nominal — a tighter rating than a typical 10-micron block, so it captures finer particulate while it polishes taste and odor. It reduces chlorine, taste, and odor, along with a broad range of organic compounds, at the final stage of a filtration system.

Coconut-shell carbon is prized for its high adsorption capacity and clean finish. This cartridge is tested and certified to NSF/ANSI Standard 42 for material safety by an independent laboratory — an added assurance you won’t find on every carbon block.

It’s built to standard 2.5″ OD × 9.75″ length (10″ × 2.5″) dimensions and drops into common standard housings used in whole-house, under-sink, and reverse-osmosis systems. Use only with water that is microbiologically safe and adequately disinfected.

Key benefits

Coconut-shell carbon — high adsorption, clean taste
Reduces chlorine, taste & odor
Reduces organic compounds, pesticides & industrial solvents
5-micron rating adds fine particulate filtration
High dirt-holding capacity, resists channeling
NSF/ANSI 42 certified components*

Specifications

Cartridge type Coconut-shell activated carbon block
Model PURETA HQCBC-10-5
Dimensions 2.5″ OD × 1.25″ ID × 9.75″ L (fits 10″ × 2.5″)
Micron rating (nominal) 5 micron
Media Coconut-shell activated carbon
Certification Tested & certified to NSF/ANSI 42 (material requirements)*
Recommended position Final stage — polishing
Brand / manufacturer PureT — Pureteck Co., Inc.
SKU HQCBC-10-5

Helps reduce

What this cartridge targets — and what it isn’t built for.

Chlorine
Taste & odor
Organic compounds
Pesticides / solvents
Fine sediment (5 µm)
Iron / H₂S
Scale / hardness

Directions for use

Place the cartridge in an appropriately sized housing and flush until the water runs clear before regular use.

Use only with water that is microbiologically safe and adequately disinfected. This is a taste/odor and particulate filter, not a purifier for untreated water.

Please note: Filter life and reduction performance depend on your water chemistry, pressure, and usage, so results vary from home to home. *NSF/ANSI 42 certification applies to material requirements for models HQCBC-10, HQCBC-1088, HQCBC-20, and HQCBC-2088 as tested by an independent laboratory. This product is not certified to treat water of unknown quality and is not a substitute for testing your water. Descriptions use general, qualified language and are not health claims.

PureT® and HQCBC™ are trademarks of Pureteck Co., Inc. Sold by MyWaterClub as a compatible replacement cartridge. All trademarks are the property of their respective owners.

Additional information

Weight 1 lbs
Dimensions 10 × 3 × 3 in

Reviews

There are no reviews yet.

Be the first to review “Coconut Shell Carbon Block Water Filter Cartridge — NSF-Certified, 5 Micron, (HQCBC-10-5), 10″ × 2.5″ (9 7/8″x2.5″)”

Coconut Shell Carbon Block Water Filter Cartridge — NSF-Certified, 5 Micron, (HQCBC-10-5), 10″ × 2.5″ (9 7/8″x2.5″)

SKU HQCBC-10-5 Category Brand: