The complete 5-filter replacement set for your 5-Stage Remineralization MyWaterClub countertop RO system — every filter, a fresh RO membrane, and the 4-in-1 mineral stage, in one box.
Filters
5 (incl. membrane)
Complete replacement set for the 5-Stage Remineralization system
This replacement set is designed for 5-Stage Remineralization MyWaterClub Countertop Reverse Osmosis systems. It includes all five filters — sediment, pre-carbon, RO membrane, post-carbon, and the 4-in-1 mineral stage — so you refresh the entire system in one purchase. This is the complete set with a new RO membrane, recommended roughly every 24 months.
Need the annual set without a membrane? If you replaced your membrane last year and only need the pre-filters, post-filter, and mineral stage, choose the annual mineral set instead (linked below).
What’s included (5 filters)
Stage 1 — Sediment
Quick-Connect 5 Micron Sediment
Traps dust, dirt, rust, and sediment. Protects downstream filters and extends the life of the system and membrane.
Stage 2 — Pre-Carbon
USA-Made T28 Coconut Carbon
Reduces chlorine and chemical contaminants, improves taste and odor, and helps protect the RO membrane.
Stage 3 — RO Membrane
RO Membrane — 100 or 150 GPD
High-performance membrane for purified drinking water. Choose 100 or 150 GPD to match your system.
Stage 4 — Post-Carbon
Quick-Connect T33 Coconut Carbon
Final carbon polishing that improves taste and odor after RO filtration, before the mineral stage.
Stage 5 — Mineral
4-in-1 Remineralization Cartridge
Restores minerals removed during RO and gently raises pH to roughly 7.5–8.0 for balanced taste. Four-media blend: tourmaline, bioceramic, Maifan stone, and alkaline mineral balls.
About the remineralization stage
RO filtration removes minerals along with contaminants, which can leave the water tasting flat. The 4-in-1 mineral cartridge adds soluble minerals back — such as calcium, magnesium, sodium, potassium, phosphorus, and zinc — and gently raises pH to approximately 7.5–8.0, restoring a balanced, rounder taste. We describe this stage in taste and mineral terms and don’t make health claims about mineralized water.
Two ways to buy: Filter Set or Pre-Assembled
Select one option at checkout depending on how quickly and easily you want to swap:
Option 1 — Filter Set Only
- Replacement filters only
- Replacement time: 30–40 minutes
- Difficulty: Moderate
- Best value — reuses your existing fittings, clips, and housing
Option 2 — Pre-Assembled Assembly
- Fully assembled set with new fittings, clips, membrane, and housing
- Swap the whole assembly in about 1 minute
- Reconnect just two tubes (kitchen diverter to assembly)
- Difficulty: Easy — the fastest, cleanest way to refresh
Why buy the complete set
- ✓Everything the 5-stage remineralization system needs in one box — no guessing which filters to order
- ✓Includes a fresh RO membrane — restores full purification performance
- ✓Includes a new 4-in-1 mineral stage — refreshes the remineralization / pH finish
- ✓Genuine MyWaterClub filters sized and tested for your system
- ✓Quick-connect fittings for a clean, tool-light swap
- ✓Choose the 1-minute pre-assembled option for the easiest possible change
- ✓USA-made carbon filters
Specifications
| Set type |
Complete 5-filter set, with RO membrane |
| Fits |
5-Stage Remineralization MyWaterClub Countertop RO |
| Filters included |
Sediment 5µm · T28 carbon · RO membrane · T33 carbon · 4-in-1 mineral |
| Membrane options |
100 GPD or 150 GPD |
| Mineral stage output |
pH ~7.5–8.0 (taste/mineral) |
| Purchase options |
Filter Set (30–40 min) or Pre-Assembled (~1 min) |
| Recommended interval |
~24 months (varies with water quality & usage) |
| Dimensions |
12 × 6 × 6 in |
| Weight |
5 lbs |
| Brand |
MyWaterClub |
| SKU |
4FILTERM1-MEM |
Sample assembly images may show 4-, 5-, or 6-stage systems; actual configuration varies by the set selected.
For your system
5-Stage Remineralized System
The system this set is built for
View system →
Mineral Annual Set (no membrane)
For the years you don’t replace the membrane
View annual set →
Inline Shut-Off Timer
Auto-stops filling — no overflows
View timer →
Good to know
- A step-by-step filter replacement guide for 5-stage RO is included — look for the printable manual on this page.
- Match the membrane GPD to your current system (100 or 150 GPD).
- TDS reading note: because the mineral stage adds minerals back, your TDS meter will read higher than it would after a plain RO system. That’s expected and does not mean the set is underperforming.
- After installing a new membrane, run and discard the first batch of water, then let the system produce for a few days before relying on your TDS reading — new membranes settle in.
- The pre-assembled option is worth it if you’d rather not disassemble filters yourself — two tubes and you’re done.
Please note: Filter life and reduction performance depend on your water chemistry, pressure, and usage, so results vary from home to home. Replacement intervals are general guidance, not a guarantee. When in doubt, test your water or ask us and we’ll help you choose the right set.
Reviews
There are no reviews yet.