Description

TDS-3 Digital Water Quality Meter

How to Take a TDS Reading

For accurate results, TDS readings must be taken at least 4–6 days after system installation or filter replacement.
New carbon filters may release fine carbon dust during the initial use period, which can temporarily affect (“fool”) TDS readings.
This carbon dust is typically flushed out after 4–5 days of normal use.

Testing Procedure:

• Collect three water samples (4–8 oz each):
• Pure (filtered) water
• Waste (reject) water
• Tap/source water

Important Note:
If your RO system includes a mineral, alkaline, KDF, calcite, or remineralization post-filter, the pure water sample
must be taken immediately after the RO membrane, before the mineral or alkaline stage.

Features

• Auto-Off Function: Automatically shuts off after 10 minutes of inactivity to conserve battery life
• Dual Measurement Range:
  • 0–999 ppm (1 ppm resolution)
  • 0–9990 ppm
• Accuracy: ±2%
• Power: 2 × 1.5V button cell batteries

Package Includes

• 1 × TDS-3 Digital Water Quality Meter

SKU: TDS3