SKU: TFCKM-1810-50 Category: Brand:

Kenmore UltraFilter & Whirlpool WHER18 Compatible 50 GPD RO Membrane, 1.8″ × 10″ TFC (PureT TFCKM-1810-50)

$34.99

  • 1.8″ × 10″ TFC membrane, 50 GPD, tap-water type
  • Fits Kenmore UltraFilter 150/300/350/500/550 and Whirlpool WHER12 / WHER18
  • Replaces Kenmore 7267970, 37233557 and Whirlpool 7266186
  • Helps reduce TDS, fluoride, nitrates, heavy metals; 2–3 year life
  • Not for Whirlpool WHER25 / UltraFilter 450 canister systems

Only 2 left in stock

Description

Description

The PureT TFCKM-1810-50 is a 50 GPD thin-film composite (TFC) reverse osmosis membrane for Sears Kenmore UltraFilter and Whirlpool WHER reverse osmosis systems. These systems use a shorter 1.8″ × 10″ membrane that standard 12″ membranes don’t fit. This membrane is made to that size, so it drops into your existing housing and brings your system back to full output and rejection without a dealer visit.

Rating50 GPD @ 50 psi*
Size1.8″ × 10″
TypeTFC, tap water
Life2–3 years
FitsKenmore / Whirlpool RO†

What this membrane does

The membrane is the heart of a reverse osmosis system. Water is pushed through a semi-permeable thin-film layer that lets water molecules pass and sends dissolved solids, salts and metals to the drain. The carbon pre-filters before it remove chlorine and sediment; the post-filter after it polishes taste. Over 2–3 years the membrane slowly loses output and rejection, and replacing it brings the system back to like-new performance.

Key benefits

  • Made in the 1.8″ × 10″ size used by Kenmore UltraFilter and Whirlpool WHER12 / WHER18 systems
  • 50 GPD output; also upgrades systems that came with a 36 GPD membrane
  • Thin-film composite membrane material made in USA
  • Factory-sealed and dry-packed for long shelf life
  • Drop-in replacement, no tools or plumbing changes
  • Costs a fraction of discontinued OEM Kenmore and Whirlpool membranes

Specifications

Attribute Value
Model PureT TFCKM-1810-50
SKU MEM-1810-50-KM
Rated output 50 GPD at 50 psi (~2.1 gal/hr)*
Membrane type Polyamide thin-film composite (TFC)
Water type Tap water (municipal or well)
Size 1.8″ × 10″
Cross-reference TW30-1810-50 size; Kenmore 7267970, 37233557; Whirlpool 7266186†
Replacement interval 2–3 years, or when product-water TDS rises
Pre-treatment Carbon pre-filters required (chlorine removal)

What a TFC membrane helps reduce

Category Examples Average reduction*
Total Dissolved Solids Overall TDS reading 90–98%
Fluoride Fluoride 85–95%
Heavy metals Lead, copper, chromium, cadmium 90–98%
Nitrates/nitrites Nitrate, nitrite 80–95%
Dissolved salts and minerals Sodium, calcium, sulfate, chloride 90–98%

*Typical ranges for residential TFC membranes. Not a certified claim for each unit. Actual results depend on water pressure, temperature, TDS and pre-filter condition.

About bacteria and microorganisms: this membrane is not sold as a microbiological purifier. Do not use it with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

Which membrane do I need?

Your system Size Output Membrane
Kenmore UltraFilter 150/300/350/500/550, Whirlpool WHER12 / WHER18 1.8″ × 10″ ~2.1 gal/hr MEM-1810-50-KM (this membrane)
RainSoft UF50T / UF50N 1.8″ × 10″ ~2.1 gal/hr MEM-1810-50-RS
Standard under-sink RO, 1812 housing 1812 ~2.1 gal/hr MEM-1812-50-U or TW-1812-50
Watts Premier WP-4V, WP-5 1.8″ × 11-5/8″ ~2.1 gal/hr MEM-1812-50-WP
Culligan AC-30 / AC-15 1.85″ × 12″ ~2.1 gal/hr MEM-1812-50-CU

Good to know before you buy

What “50 GPD” means. 50 gallons per day is the lab rating at 50 psi, about 2.1 gallons per hour. At typical home pressure and cooler water, expect less.*

Upgrading from a 36 GPD membrane? UltraFilter 150, 300 and 350 systems originally shipped with a 36 GPD membrane. This 50 GPD membrane fits the same housing. If your system has a separate drain flow restrictor sized for 36 GPD, replace it with a 50 GPD restrictor for best results.

Pre-filters protect the membrane. Chlorine destroys TFC membranes. Replace your carbon pre-filters on schedule, ideally at the same time as the membrane.

Replace the O-rings if they look worn. Older Kenmore and Whirlpool housings rely on O-ring seals. A flattened or cracked O-ring can leak or let water bypass the membrane.

Replacing your membrane

  1. Turn off the cold-water feed to the RO system and close the tank valve.
  2. Open the RO faucet to release pressure.
  3. Unscrew the membrane housing (or its cap) following your system’s manual.
  4. Pull out the old membrane. Note which way it faces.
  5. Insert the new membrane in the same direction and push it firmly into place.
  6. Reassemble the housing, turn the water back on, and check for leaks.
  7. Let the tank fill, then drain it completely. Repeat once and discard the first two tanks.

Compatible systems & replacement membranes

RO systems it fits†

Brand System Model number
Sears Kenmore UltraFilter 500 625.384750
Sears Kenmore UltraFilter 550 625.385750
Sears Kenmore UltraFilter 350 625.385720
Sears Kenmore UltraFilter 300 625.384720
Sears Kenmore UltraFilter 150 625.385700
Whirlpool WHER18 WHER18
Whirlpool WHER12 WHER12
EcoWater Versions of the systems above Check membrane size: 1.8″ × 10″

Replaces these membranes†

Brand Part number Output
Kenmore 7267970 50 GPD
Kenmore 37233557 50 GPD
Whirlpool 7266186 50 GPD
Kenmore / Whirlpool 7267962, 7264223 36 GPD (upgrade to 50 GPD)
FilmTec size TW30-1810-50, TW30-1810-36 50 / 36 GPD

Not compatible with

  • Whirlpool WHER25 and Kenmore UltraFilter 450 systems that use the WHEERM quick-change canister membrane
  • Standard under-sink RO systems with a 12″ (1812) membrane housing
  • RainSoft systems (use MEM-1810-50-RS)

Check before you order: remove your old membrane and measure it. It should be about 1.8″ wide and 10″ long, a loose membrane (not a sealed canister). If yours is a 12″ membrane or a twist-on canister, this is not the right part. Not sure? Send us a photo of your system’s model label or your old membrane and we’ll confirm the fit.

Fit questions

Will it fit my Kenmore UltraFilter 500?
Yes. The UltraFilter 500 (625.384750) uses a 1.8″ × 10″ 50 GPD membrane, the same size as this one.

Does it fit the Whirlpool WHER18 or WHER12?
Yes. Both use the 1.8″ × 10″ membrane housing.

My system came with a 36 GPD membrane. Can I use this 50 GPD one?
Yes, it fits the same housing and makes more water. For best results, match the drain flow restrictor to 50 GPD if your system has one.

Does it fit the Whirlpool WHER25?
No. The WHER25 uses a twist-on canister membrane (WHEERM), not a loose 10″ membrane.

Is it the same as the RainSoft membrane?
Same diameter and length, but sold for a different system. RainSoft owners should choose MEM-1810-50-RS.

*Rated output, reduction ranges and compatibility are based on manufacturer and industry data; real-world output is usually lower than the rating.

†Sears, Kenmore, UltraFilter, Whirlpool, EcoWater, RainSoft and FilmTec are trademarks of their respective owners. Brand names and part numbers are used only to identify compatible systems. My Water Club is not affiliated with or endorsed by any of these companies. This is a compatible replacement membrane, not an OEM part. Using a non-OEM part may affect your system manufacturer’s warranty.

Additional information

Weight 0.5 lbs
Dimensions 12 × 2 × 2 in

Reviews

There are no reviews yet.

Be the first to review “Kenmore UltraFilter & Whirlpool WHER18 Compatible 50 GPD RO Membrane, 1.8″ × 10″ TFC (PureT TFCKM-1810-50)”

Kenmore UltraFilter & Whirlpool WHER18 Compatible 50 GPD RO Membrane, 1.8″ × 10″ TFC (PureT TFCKM-1810-50)

SKU TFCKM-1810-50 Category Brand: