SKU: SED5-20BB Category: Tag Brand:

5 Micron Sediment Filter Cartridge, Heavy Duty BB 20″ × 4.5″ Whole House Replacement, Melt-Blown Polypropylene Stage 1 Pre-Filter

$16.95

  • 5 micron melt-blown polypropylene: helps reduce dirt, silt, sand & rust particles
  • Standard 20″ × 4.5″ size: fits heavy-duty 20″ whole house housings
  • Stage 1 pre-filter: protects carbon & specialty stages from clogging
  • Replace every 6–9 months · cold water only (40–100 °F) · max 90 PSI
  • Buy 2, 5 or 10 and save · free local pickup in San Diego

In stock

<1
$16.95
1
$16.95 each
2 - 4
$14.95 each
5 - 9
$12.95 each
10 - 29
$11.50 each
30+
$9.95 each

Description

A high-capacity 5 micron sediment filter in heavy-duty 20″ × 4.5″ (BB) size that captures dirt, silt, sand and rust particles on the main water line — the first stage that protects every filter after it.

Stage
Stage 1 · Pre-filter
Size
20″ × 4.5″ BB
Micron
5 µm nominal
Life
6–9 months
Fits
Standard 20″ × 4.5″ BB housings

What this 5 micron sediment filter does

This 5-micron melt-blown polypropylene sediment cartridge is the first stage of a whole-house filtration system. Installed on the main water line, it captures dirt, silt, sand and rust particles as water enters your home — before that grit can reach anything downstream.

The 20″ × 4.5″ format has about twice the filter body of a 10″ × 4.5″ cartridge, so it holds more dirt before it needs changing — the reason 20″ housings are used on larger homes and higher-use lines. Its graded melt-blown structure traps larger particles in the outer layers and finer ones toward the core, so the cartridge loads through its depth instead of only at the surface.

Trapping particles up front keeps your water clear and protects the stages after it: carbon and specialty cartridges last longer when they aren’t clogged by sediment. It fits the same housings as other standard 20″ × 4.5″ sediment cartridges — see the compatibility list below.

Key benefits

  • ✓ 5-micron nominal filtration for sediment reduction
  • ✓ Helps reduce dirt, silt, sand & rust particles
  • ✓ Large 20″ × 4.5″ body — more dirt-holding capacity than a 10″ cartridge
  • ✓ Food-grade melt-blown polypropylene
  • ✓ Protects carbon & specialty stages from clogging
  • ✓ Replaces same-size 5 micron cartridges from iSpring, Express Water, Hydronix & more*

Specifications

Cartridge type Melt-blown polypropylene sediment
Nominal size 20″ × 4.5″ (4.5 × 20), standard BB size
Fits Standard 20″ × 4.5″ (BB) housings — same size as Pentair Pentek Big Blue® #20 cartridges†
Compatible with* iSpring FP25B · Express Water FLTWH2045S · Hydronix SDC-45-2005 · Tier1 P5-20BB + more brands — full list ↓
Micron rating (nominal) 5 micron
Media Food-grade melt-blown polypropylene (PP)
Recommended position Stage 1 (pre-filter)
Operating temperature 40 °F – 100 °F (cold water use)
Max pressure 90 PSI
Typical life 6–9 months (varies with water quality & usage)
Ships as 1 cartridge, sealed, in a 20 × 5 × 5 in box · 2.2 lb
Country of origin China
Brand MyWaterClub (made for MyWaterClub)
SKU SED5-20BB

Helps reduce

What this cartridge targets — and what it isn’t built for.

Dirt & silt
Sand
Rust particles
Hardness / scale
Chlorine / taste
Dissolved iron
Dissolved chemicals

Which 20″ × 4.5″ cartridge do I need?

The MyWaterClub heavy-duty 20″ × 4.5″ range by stage. Your current filter is highlighted — tap any other name to view it.

Cartridge Type Best for
Stage 1 — Sediment
SED5-20BB (this filter) Melt-blown sediment · 5 µm Whole-house pre-filtration · city or well water
Carbon stages
GAC-20BB Granular activated carbon · 25 µm High-flow chlorine, taste & odor reduction — lowest cost
CTO-20BB Carbon block (CTO) · 10 µm Everyday chlorine, taste & odor polishing
CACB-20BB Coconut carbon block · 10 µm Coconut carbon — the usual pick for taste & odor
Specialty media
IRON-20BB Iron-reduction + softening resin Clear-water (dissolved) iron · light softening
SCALE-20BB Polyphosphate scale inhibitor Scale protection for heaters & appliances (does not remove hardness)

Good to know before you buy

Always the first stage. Sediment goes before carbon and specialty media. Install this ahead of any other 20″ × 4.5″ cartridge.

20″ or 10″? Both are 4.5″ across; only the length differs, and they don’t swap. Measure your old cartridge or the housing sump before ordering. If your housing takes standard 20″ × 4.5″ (BB) cartridges — often called Big Blue® size — this is your size†.

When to change it. Typically every 6–9 months. Change it sooner if whole-house pressure drops or the cartridge turns dark brown — a clogged sediment filter chokes flow to the whole house. A brown cartridge is a working cartridge: the color is dirt it caught.

Local pickup in San Diego. Choose Local Pickup at checkout and skip the shipping on these large cartridges — handy when you buy a few at a time.

Compatible housings & replacement cartridges

SED5-20BB is a standard 20″ × 4.5″ melt-blown cartridge, rated 5 micron. It fits the housings below and can replace the same-size 5 micron sediment cartridges listed after them.*

Housings & systems it fits

Brand Housing / system model
My Water Club WHS-1S-20BB, WHS-2SC-20BB and WHS-3SGC-20BB systems — Stage 1
Pentek† Big Blue® #20 (20″ × 4.5″) housings†
iSpring WGB22B and WGB32B systems — Stage 1 only
Express Water 3-stage 4.5″ × 20″ whole house systems
APEC CB1-SED20-BB, CB2-SED-CAB20-BB and CB3 series 20″ systems
3M Aqua-Pure AP802 whole house housing
VIQUA IHS22-D4 UV system pre-filter housings
SimPure DB20P 20″ whole house housings
Brio 20″ whole house systems

Replacement for iSpring FP25B, Express Water FLTWH2045S, Hydronix SDC-45-2005 & more

Brand Cartridge model it can replace Their cartridge type
Pentek† DGD-5005-20 (155358-43) Dual-gradient spun PP · 5 µm
iSpring FP25B Polypropylene · 5 µm
Express Water FLTWH2045S Polypropylene, density-layered · 5 µm
Hydronix SDC-45-2005 Graded-density depth PP · 5 µm
Tier1 P5-20BB Spun polypropylene · 5 µm
SpiroPure SP-DD-5005-20BB Dual-gradient PP · 5 µm
VIQUA CMB-520-HF Polypropylene · 5 µm
3M Aqua-Pure AP810-2 Polypropylene · 5 µm
Watts FPMB-BB5-20 Melt-blown PP · 5 µm
Liquatec SDF-45-2005 Polypropylene depth · 5 µm

Also searched as: DGD500520 · 15535843 · FP25B · FLTWH2045S · SDC452005 · P520BB · 20×4.5 sediment filter 5 micron

Check before you order. Your old cartridge should be about 4.5″ across and 20″ long, with an open center hole at both ends. A 10″ cartridge will not seal in a 20″ housing. Not sure? Send us a photo of the cartridge label and we’ll confirm the fit.

Replacing a coarser cartridge? If yours is 20–50 micron (for example the 30 micron pleated APEC FI-SED20-BB), SED5-20BB fits the same housing but catches finer particles, so on heavy sediment it may need changing sooner.

Fit questions

Does SED5-20BB replace the Pentek DGD-5005-20?

It fits the same Big Blue® #20 housings† and has the same 5 micron rating and 20″ × 4.5″ size. The DGD-5005-20 is a dual-gradient spun cartridge; SED5-20BB is a graded melt-blown cartridge.

Will it work as Stage 1 in an iSpring WGB32B or WGB22B?

Yes, in the first (sediment) housing in place of the iSpring FP25B. Both are 5 micron polypropylene cartridges in the standard 20″ × 4.5″ size. Keep carbon cartridges in the later stages.

Can I use it instead of the Express Water FLTWH2045S or Hydronix SDC-45-2005?

Yes, for most homes. All three are 5 micron, 4.5″-diameter polypropylene sediment cartridges 20″ long, so they fit the same housings.

My housing is 10″ long. Will this fit?

No. This is the 20″ cartridge. For 10″ × 4.5″ housings, see our 10″ × 4.5″ cartridges.

How many should I keep on hand?

Most homes change the sediment stage once or twice a year, and it is the stage that clogs first. Buying 2 or more lowers the price per cartridge and means one is on the shelf when pressure drops.

Building a full stack?

Classic whole-house pairing
SED5-20BB (Stage 1) + CTO-20BB carbon block (Stage 2)
Three-stage carbon stack
SED5-20BB → GAC-20BB → CACB-20BB coconut carbon block
Dissolved iron on well water
Add IRON-20BB after this sediment stage
Hard-water scale protection
Add SCALE-20BB as the final stage

Please note: Filter life and reduction performance depend on your water chemistry, pressure, and usage, so results vary from home to home. This product is not certified to treat water of unknown quality and is not a substitute for testing your water. Descriptions use general, qualified language and are not health claims. When in doubt, test your water or ask us and we’ll help you build the right stack.

† Big Blue® and Pentek® are registered trademarks of Pentair. My Water Club is not affiliated with, sponsored by or endorsed by Pentair. These names are used only to describe size and compatibility.

* 3M and Aqua-Pure, APEC, Brio, Express Water, Hydronix, iSpring, Liquatec, SimPure, SpiroPure, Tier1, VIQUA and Watts, and their model names, are trademarks of their respective owners. My Water Club is not affiliated with, sponsored by or endorsed by these companies, and this cartridge is not made by them. Brand and model names are used only to identify housings this cartridge fits and the same-size cartridges it can replace. Compatibility is based on the standard 20″ × 4.5″ size; please check your housing before ordering.

Additional information

Weight 2.2 lbs
Dimensions 20 × 5 × 5 in

Reviews

There are no reviews yet.

Be the first to review “5 Micron Sediment Filter Cartridge, Heavy Duty BB 20″ × 4.5″ Whole House Replacement, Melt-Blown Polypropylene Stage 1 Pre-Filter”