SKU: IRON-20BB Category: Tag Brand:

Iron Reduction Water Filter Cartridge with Softening Resin, Heavy Duty BB 20″ × 4.5″, 25 Micron — Reduces Dissolved Iron, Manganese & Hardness

$59.95

  • Iron reduction water filter: cation-exchange resin reduces dissolved (clear-water) iron & manganese
  • Helps reduce orange/rust staining on fixtures, sinks & laundry; also reduces some hardness
  • Best for low-to-moderate iron & hardness · not for red/rusty (already-oxidized) water
  • Standard 20″ × 4.5″ size: fits heavy-duty 20″ whole house housings, 25 micron
  • Use after a sediment pre-filter (after carbon on chlorinated water) · replace every 3–6 months · max 90 PSI

In stock

<1
$59.95
1
$59.95 each
2 - 4
$56.95 each
5 - 9
$52.95 each
10 - 19
$49.95 each
20+
$47.95 each

Description

An iron reduction water filter in heavy-duty 20″ × 4.5″ (BB) size for clear-water iron: cation-exchange resin that reduces dissolved iron and manganese and takes the edge off hardness, to help cut orange staining on fixtures, sinks and laundry.

Stage
Specialty stage · after sediment
Size
20″ × 4.5″ BB
Micron
25 µm nominal
Life
3–6 months
Fits
Standard 20″ × 4.5″ BB housings

What this iron reduction water filter does

Dissolved iron is hard to spot: water pours from the tap clear, then leaves orange-brown stains on sinks, toilets, fixtures and laundry as the iron oxidizes in air. This cartridge works while the iron is still dissolved, using cation-exchange resin — the same media family as a water softener — to capture ferrous (clear-water) iron and manganese as water passes through.

Because it’s softening-type resin, it also reduces hardness (calcium and magnesium). Hardness and iron share the resin’s capacity, so the cartridge works best on water that is low to moderate in both. The 20″ × 4.5″ format holds about twice the resin of the 10″ × 4.5″ version, which is why it suits larger homes.

Run it in a standard 20″ × 4.5″ housing after a sediment stage. It’s for clear-water iron only: if water already comes out red, orange or rusty, the iron has oxidized into particles, and that needs oxidizing or backwashing iron treatment instead. It fits the same housings as other 20″ × 4.5″ iron cartridges — see the compatibility list below.

Key benefits

  • ✓ Reduces dissolved (ferrous) iron & manganese in clear water
  • ✓ Helps reduce orange/rust staining on fixtures, sinks & laundry
  • ✓ Cation-exchange resin also reduces some hardness
  • ✓ Helps with metallic taste from iron
  • ✓ About twice the resin of the 10″ × 4.5″ cartridge
  • ✓ Fits the same housings as iSpring, Express Water & APEC 20″ iron cartridges*

Specifications

Cartridge type Iron reduction + softening — ion-exchange resin
Nominal size 20″ × 4.5″ (4.5 × 20), standard BB size
Fits Standard 20″ × 4.5″ (BB) housings — same size as Pentair Pentek Big Blue® #20 cartridges†
Compatible with* iSpring FM25B · Express Water FLTWH2045I · APEC FI-IRON20-BB — full list ↓
Micron rating (nominal) 25 micron
Media Iron-reduction / softening cation-exchange resin; polypropylene core & outer shell
Recommended position Specialty stage — after sediment; after carbon on chlorinated water
Operating temperature 40 °F – 100 °F (cold water use)
Max pressure 90 PSI
Typical life 3–6 months (shorter with more iron or harder water)
Ships as 1 cartridge, sealed, in a 20 × 5 × 5 in box · 8.9 lb
Country of origin Taiwan
Brand MyWaterClub (made for MyWaterClub)
SKU IRON-20BB

Helps reduce

What this cartridge targets — and what it isn’t built for.

Dissolved (ferrous) iron
Manganese
Hardness (Ca & Mg)
Rust staining
Red / already-oxidized iron
Iron bacteria
Chlorine / taste & odor
H₂S odor
Sediment

Which 20″ × 4.5″ cartridge do I need?

The MyWaterClub heavy-duty 20″ × 4.5″ range by stage. Your current filter is highlighted — tap any other name to view it.

Cartridge Type Best for
Stage 1 — Sediment
SED5-20BB Melt-blown sediment · 5 µm Whole-house pre-filtration · city or well water
Carbon stages
GAC-20BB Granular activated carbon · 25 µm High-flow chlorine, taste & odor reduction — lowest cost
CTO-20BB Carbon block (CTO) · 10 µm Everyday chlorine, taste & odor polishing
CACB-20BB Coconut carbon block · 10 µm Coconut carbon — the usual pick for taste & odor
Specialty media
IRON-20BB (this filter) Iron-reduction + softening resin Clear-water (dissolved) iron · light softening
SCALE-20BB Polyphosphate scale inhibitor Scale protection for heaters & appliances (does not remove hardness)

Good to know before you buy

The glass test — clear-water or red-water iron? Fill a clear glass from the tap. If the water is clear but turns orange after sitting (or you get stains despite clear water), your iron is dissolved — this is the right cartridge. If the water comes out red, orange or rusty, the iron is already oxidized into particles and exchange resin won’t fix it. Not sure? Bring a sample to our San Diego office for a free test, or ask us.

How much iron? Cartridge iron filters in this size are generally sold for water with up to about 3 ppm of dissolved iron (that is the rating iSpring and Pentek give their 20″ iron cartridges). Above that, or on hard water, a backwashing iron filter or a softener is the better tool.

Hardness shares the capacity. The resin takes up calcium and magnesium along with iron. On hard water the cartridge loads up quickly and iron reduction drops with it.

On chlorinated city water, put carbon first. Chlorine degrades cation-exchange resin over time. Run GAC-20BB or CTO-20BB ahead of this cartridge; on well water, where most iron problems are, that’s not a concern.

Shortest interval in the range. Replace every 3–6 months, and sooner if staining or metallic taste returns. Local pickup in San Diego. Choose Local Pickup at checkout and skip the shipping on these large cartridges — handy when you buy a few at a time.

Compatible housings & replacement cartridges

IRON-20BB is a standard 20″ × 4.5″ iron reduction cartridge with cation-exchange resin. It fits the housings below and can take the place of the same-size iron and manganese cartridges listed after them. The media differs from brand to brand, so check the right-hand column.*

Housings & systems it fits

Brand Housing / system model
My Water Club WHS-1S-20BB, WHS-2SC-20BB and WHS-3SGC-20BB systems — Stage 2 or an added stage
Pentek† Big Blue® #20 (20″ × 4.5″) housings†
iSpring WGB22BM and WGB32BM iron & manganese systems — in the iron stage
Express Water 3-stage 4.5″ × 20″ whole house systems
APEC CB1-SED20-BB, CB2-SED-CAB20-BB and CB3 series 20″ systems
3M Aqua-Pure AP802 whole house housing
VIQUA IHS22-D4 UV system pre-filter housings
SimPure DB20P 20″ whole house housings
Brio 20″ whole house systems

Same-size iron cartridges: iSpring FM25B, Express Water FLTWH2045I, APEC FI-IRON20-BB

Brand Iron cartridge Their cartridge
iSpring FM25B Iron & manganese reducing cartridge
Express Water FLTWH2045I Iron & manganese reducing cartridge
APEC FI-IRON20-BB Permanganate-treated zeolite
Pentek† RFFE20-BB (155263-43) Radial-flow iron-oxidizing media · up to 3 ppm dissolved iron

Also searched as: FM25B · FLTWH2045I · FIIRON20BB · RFFE20BB · 15526343 · iron filter 20×4.5 · iron and manganese filter cartridge 20 inch

Check before you order. Your old cartridge should be about 4.5″ across and 20″ long, with an open center hole at both ends. A 10″ cartridge will not seal in a 20″ housing. Not sure? Send us a photo of the cartridge label and we’ll confirm the fit.

Iron plus rotten-egg odor? Resin doesn’t touch H₂S. Ask us — strong H₂S needs dedicated treatment.

Fit questions

Can I use IRON-20BB in place of the iSpring FM25B?

It fits the iron stage of the WGB22BM and WGB32BM: both are 20″ × 4.5″ iron and manganese cartridges. iSpring rates the FM25B for up to 3.0 ppm iron. IRON-20BB is a softening-type resin, so it works best on water that is also low in hardness.

I use a Pentek RFFE20-BB. Can I switch?

It fits the same housing, but the media is different. The RFFE20-BB uses iron-oxidizing media and is rated for up to 3 ppm dissolved iron. IRON-20BB is cation-exchange resin: it also takes out some hardness, and that hardness uses up part of its capacity. On soft-to-moderate water with clear-water iron it’s a reasonable swap; on hard water, ask us first.

Is this a water softener?

No. It uses softening-type resin, but a cartridge holds far less of it than a softener tank and it is not regenerated — you replace it. Expect light softening as a side effect, not soft water.

How do I know when to change it?

When orange staining or a metallic taste comes back, or every 3–6 months — sooner with more iron or harder water. Iron and hardness test strips at a tap after the filter show it earlier than the stains do.

My water comes out orange or rusty. Will this help?

No. Orange water means the iron has already oxidized into particles, which clog exchange resin. That needs an oxidizing or backwashing iron filter, with a sediment cartridge such as SED5-20BB to catch the particles.

Building a full stack?

Well water with clear-water iron
SED5-20BB sediment → IRON-20BB
Chlorinated water with iron
SED5-20BB → GAC-20BB carbon → IRON-20BB
Iron + scale on heaters
IRON-20BB → SCALE-20BB as the final stage
Iron + taste & odor
SED5-20BB → CACB-20BB → IRON-20BB

Please note: Filter life and reduction performance depend on your water chemistry, pressure, and usage, so results vary from home to home. This product is not certified to treat water of unknown quality and is not a substitute for testing your water. Descriptions use general, qualified language and are not health claims. When in doubt, test your water or ask us and we’ll help you build the right stack.

† Big Blue® and Pentek® are registered trademarks of Pentair. My Water Club is not affiliated with, sponsored by or endorsed by Pentair. These names are used only to describe size and compatibility.

* 3M and Aqua-Pure, APEC, Brio, Express Water, iSpring, SimPure and VIQUA, and their model names, are trademarks of their respective owners. My Water Club is not affiliated with, sponsored by or endorsed by these companies, and this cartridge is not made by them. Brand and model names are used only to identify housings this cartridge fits and the same-size cartridges it can replace. Compatibility is based on the standard 20″ × 4.5″ size; please check your housing before ordering.

Additional information

Weight 9.5 lbs
Dimensions 22 × 6 × 6 in

Reviews

There are no reviews yet.

Be the first to review “Iron Reduction Water Filter Cartridge with Softening Resin, Heavy Duty BB 20″ × 4.5″, 25 Micron — Reduces Dissolved Iron, Manganese & Hardness”

Iron Reduction Water Filter Cartridge with Softening Resin, Heavy Duty BB 20″ × 4.5″, 25 Micron — Reduces Dissolved Iron, Manganese & Hardness

SKU IRON-20BB Category Tag Brand: