SKU: SCALE-20BB Category: Tag Brand:

Salt-Free Scale Inhibitor Water Filter Cartridge, Heavy Duty BB 20″ × 4.5″, Polyphosphate — Helps Prevent Limescale in Pipes, Water Heaters & Appliances

$39.95

  • Salt-free scale inhibitor: food-grade polyphosphate helps prevent limescale in pipes, water heaters & appliances
  • Helps reduce spotting on glass, tile & faucets · no salt, brine or electricity
  • Does not remove hardness: water still tests “hard”, but less scale forms
  • Standard 20″ × 4.5″ size: fits heavy-duty 20″ whole house housings · install as the final stage
  • Replace every 6–12 months · cold water only (40–100 °F) · max 90 PSI

In stock

<1
$39.95
1
$39.95 each
2 - 4
$37.95 each
5 - 9
$34.95 each
10 - 19
$31.95 each
20+
$29.95 each

Description

A salt-free scale inhibitor water filter in heavy-duty 20″ × 4.5″ (BB) size: food-grade polyphosphate that helps keep hardness minerals from forming limescale in pipes, water heaters and appliances.

Stage
Final stage · after carbon
Size
20″ × 4.5″ BB
Micron
25 µm nominal
Life
6–12 months
Fits
Standard 20″ × 4.5″ BB housings

What this scale inhibitor water filter does

Hard water leaves limescale wherever it is heated or dries: inside water heaters, on heating elements, in pipes and on fixtures. This cartridge is filled with food-grade polyphosphate, which dissolves slowly into the water and helps keep calcium and magnesium suspended, so less of it sticks as scale.

It is not a water softener. The minerals stay in the water, so it will still test “hard” — but less scale forms. There is no salt, no brine, no drain line and no electricity. The 20″ × 4.5″ format holds more polyphosphate than the 10″ × 4.5″ version, which suits larger homes and higher water use.

Install it as the final stage, after sediment and carbon, on the cold line ahead of the water heater. It fits the same housings as other 20″ × 4.5″ polyphosphate cartridges — see the compatibility list below.

Key benefits

  • ✓ Helps prevent limescale in pipes, water heaters & appliances
  • ✓ Helps reduce spotting on glass, tile & faucets
  • ✓ Salt-free: no salt, brine, drain or electricity
  • ✓ Food-grade polyphosphate
  • ✓ Large 20″ × 4.5″ cartridge for whole-house flow
  • ✓ Replaces same-size polyphosphate cartridges from iSpring, Express Water, Brio & SpiroPure*

Specifications

Cartridge type Polyphosphate scale inhibitor (salt-free)
Nominal size 20″ × 4.5″ (4.5 × 20), standard BB size
Fits Standard 20″ × 4.5″ (BB) housings — same size as Pentair Pentek Big Blue® #20 cartridges†
Compatible with* iSpring FWDS150K · Express Water FLTWH2045P · Brio RFCTY4520PHO · SpiroPure SP-PH-20BB — full list ↓
Micron rating (nominal) 25 micron
Media Food-grade polyphosphate; polypropylene core & outer shell
Recommended position Final stage — after sediment and carbon
Operating temperature 40 °F – 100 °F (cold water use)
Max pressure 90 PSI
Typical life 6–12 months (about 6 on very hard water or high use)
Ships as 1 cartridge, sealed, in a 20 × 5 × 5 in box · 3.3 lb
Country of origin Taiwan
Brand MyWaterClub (made for MyWaterClub)
SKU SCALE-20BB

Helps reduce

What this cartridge targets — and what it isn’t built for.

Limescale build-up
Scale in water heaters
Spotting on fixtures
Hardness (water still tests hard)
Chlorine / taste & odor
Dissolved iron
Sediment

Which 20″ × 4.5″ cartridge do I need?

The MyWaterClub heavy-duty 20″ × 4.5″ range by stage. Your current filter is highlighted — tap any other name to view it.

Cartridge Type Best for
Stage 1 — Sediment
SED5-20BB Melt-blown sediment · 5 µm Whole-house pre-filtration · city or well water
Carbon stages
GAC-20BB Granular activated carbon · 25 µm High-flow chlorine, taste & odor reduction — lowest cost
CTO-20BB Carbon block (CTO) · 10 µm Everyday chlorine, taste & odor polishing
CACB-20BB Coconut carbon block · 10 µm Coconut carbon — the usual pick for taste & odor
Specialty media
IRON-20BB Iron-reduction + softening resin Clear-water (dissolved) iron · light softening
SCALE-20BB (this filter) Polyphosphate scale inhibitor Scale protection for heaters & appliances (does not remove hardness)

Good to know before you buy

It does not remove hardness. A hardness test after the filter reads the same as before. What changes is how much of that hardness ends up as scale.

Put it last, and before the water heater. Sediment and carbon go first; the scale inhibitor is the final stage on the cold line, where it protects the heater and everything after it.

The polyphosphate dissolves as it works. Change the cartridge every 6–12 months even if nothing looks wrong — closer to 6 on very hard water or with high use.

Very hard water or you want soft water? That is a job for a water softener; this cartridge is the low-maintenance option when the goal is less scale. Local pickup in San Diego. Choose Local Pickup at checkout and skip the shipping on these large cartridges — handy when you buy a few at a time.

Compatible housings & replacement cartridges

SCALE-20BB is a standard 20″ × 4.5″ polyphosphate scale inhibitor cartridge. It fits the housings below and can replace the same-size polyphosphate cartridges listed after them.*

Housings & systems it fits

Brand Housing / system model
My Water Club WHS-1S-20BB, WHS-2SC-20BB and WHS-3SGC-20BB systems — as an added final stage
Pentek† Big Blue® #20 (20″ × 4.5″) housings†
iSpring WGB32B-DS and WGB32B-KDS anti-scale systems · WDS150K single housing
Express Water 3-stage 4.5″ × 20″ whole house systems
APEC CB1-SED20-BB, CB2-SED-CAB20-BB and CB3 series 20″ systems
3M Aqua-Pure AP802 whole house housing
VIQUA IHS22-D4 UV system pre-filter housings
SimPure DB20P 20″ whole house housings
Brio 20″ whole house systems

Replacement for iSpring FWDS150K, Express Water FLTWH2045P, Brio & SpiroPure polyphosphate cartridges

Brand Cartridge model it can replace Their cartridge type
iSpring FWDS150K Anti-scale · polyphosphate scale inhibitor
Express Water FLTWH2045P Polyphosphate anti-scale
Brio RFCTY4520PHO Slow-release sodium phosphate beads
SpiroPure SP-PH-20BB · SP-SC100-20BB Polyphosphate anti-scale · descaler

Also searched as: FWDS150K · FLTWH2045P · RFCTY4520PHO · SPPH20BB · polyphosphate filter 20×4.5 · anti scale filter 20 inch whole house

Check before you order. Your old cartridge should be about 4.5″ across and 20″ long, with an open center hole at both ends. A 10″ cartridge will not seal in a 20″ housing. Not sure? Send us a photo of the cartridge label and we’ll confirm the fit.

Also have rust stains? Scale and iron are different problems. Add IRON-20BB ahead of this cartridge for clear-water iron.

Fit questions

Can I use SCALE-20BB in place of the iSpring FWDS150K?

Yes. Both are 20″ × 4.5″ polyphosphate anti-scale cartridges, so SCALE-20BB fits the WDS150K housing and the anti-scale stage of the WGB32B-DS.

Does it replace the Express Water FLTWH2045P?

Yes. Both are polyphosphate cartridges in the standard 4.5″ × 20″ size and fit the same housings.

Will my water test soft?

No. Polyphosphate does not remove calcium or magnesium, so hardness test results don’t change. It helps keep those minerals from forming scale.

Where does it go in the system?

Last: after sediment and carbon, on the cold line before the water heater. If your system has no free housing, add a single 20″ × 4.5″ housing after it.

How long does it last?

Typically 6–12 months; other brands’ 20″ polyphosphate cartridges are sold with the same 6–12 month interval. Plan on about 6 months on very hard water.

Building a full stack?

Full city-water stack
SED5-20BB → CTO-20BB → SCALE-20BB
Coconut carbon + scale
SED5-20BB → CACB-20BB → SCALE-20BB
Iron + scale on heaters
IRON-20BB → SCALE-20BB as the final stage
Tankless water heater
Install SCALE-20BB on the cold line feeding the heater

Please note: Filter life and reduction performance depend on your water chemistry, pressure, and usage, so results vary from home to home. This product is not certified to treat water of unknown quality and is not a substitute for testing your water. Descriptions use general, qualified language and are not health claims. When in doubt, test your water or ask us and we’ll help you build the right stack.

† Big Blue® and Pentek® are registered trademarks of Pentair. My Water Club is not affiliated with, sponsored by or endorsed by Pentair. These names are used only to describe size and compatibility.

* 3M and Aqua-Pure, APEC, Brio, Express Water, iSpring, SimPure, SpiroPure and VIQUA, and their model names, are trademarks of their respective owners. My Water Club is not affiliated with, sponsored by or endorsed by these companies, and this cartridge is not made by them. Brand and model names are used only to identify housings this cartridge fits and the same-size cartridges it can replace. Compatibility is based on the standard 20″ × 4.5″ size; please check your housing before ordering.

Additional information

Weight 3.3 lbs
Dimensions 20 × 5 × 5 in

Reviews

There are no reviews yet.

Be the first to review “Salt-Free Scale Inhibitor Water Filter Cartridge, Heavy Duty BB 20″ × 4.5″, Polyphosphate — Helps Prevent Limescale in Pipes, Water Heaters & Appliances”