Description
A catalytic carbon + KDF-85 filter in heavy-duty 20″ × 4.5″ (BB) size: catalytic carbon for chloramine and chlorine, plus copper-zinc KDF-85 media that helps reduce hydrogen sulfide (H₂S) odor and some heavy metals — two media in one cartridge.
What this catalytic carbon + KDF-85 filter does
This cartridge combines two media in one heavy-duty 20″ × 4.5″ shell. Catalytic carbon has a modified surface that speeds up the breakdown of chloramine — the chlorine-ammonia disinfectant many utilities use — and it also reduces regular chlorine, taste and odor.
KDF-85 is a copper-zinc media that works by an oxidation-reduction (redox) reaction rather than adsorption. It’s the KDF grade made for hydrogen sulfide (H₂S) — the “rotten egg” odor — and it also helps reduce some heavy metals. It makes up about 15% of the media, with bituminous coal-based catalytic carbon making up the rest. The 20″ × 4.5″ format holds about twice the media of the 10″ × 4.5″ version.
Run it after a sediment stage. It’s the cartridge to choose when you have chloramine plus H₂S odor or metal concerns; if chloramine is the only issue, CAT-20BB has more catalytic carbon for that job and costs less. It fits the same housings as other 20″ × 4.5″ carbon + KDF cartridges — see the compatibility list below.
Key benefits
- ✓ Catalytic carbon helps reduce chloramine & chlorine
- ✓ KDF-85 helps reduce hydrogen sulfide (H₂S) “rotten egg” odor
- ✓ KDF-85 also helps reduce some heavy metals
- ✓ Two media in one cartridge — one housing covers more
- ✓ Replaces same-size carbon + KDF-85 cartridges from Home Master, Express Water, Aries, APEC & more*
- ✓ Fits all My Water Club 20″ × 4.5″ systems
Specifications
Helps reduce
What this cartridge targets — and what it isn’t built for.
Chlorine
Hydrogen sulfide (H₂S) odor
Some heavy metals
Taste & odor
Fine sediment
Fluoride
Red / rusty water
Scale / hardness
Dissolved solids (TDS)
Which 20″ × 4.5″ cartridge do I need?
The MyWaterClub heavy-duty 20″ × 4.5″ range by stage. Your current filter is highlighted — tap any other name to view it.
Browse all 20″ × 4.5″ BB cartridges →
Good to know before you buy
CATKDF85 or CAT — do you need the KDF? Both handle chloramine and chlorine. Choose this cartridge when H₂S odor or heavy-metal concerns are also in play. If chloramine alone is the issue, CAT-20BB has more catalytic carbon for that job and costs less.
Chloramine uses up catalytic carbon faster than chlorine. Reduction depends on contact time and the media’s capacity. For reference, other brands rate their all-catalytic 20″ × 4.5″ cartridges at about 8,000–8,750 gallons for chloramine; this one has about 15% less catalytic carbon. On chloraminated water change it on the short end of its life, check a cold tap with a total-chlorine test strip, and for drinking water add point-of-use filtration at the tap.
Strong H₂S needs dedicated treatment. This cartridge helps with light-to-moderate rotten-egg odor. A heavily sulfurous well needs an oxidizing or aeration system — test your water first if the odor is strong.
Sediment first, gasket end up, flush on install. Keep a sediment cartridge (SED5-20BB) ahead of it. Install it with the black gasket end up, and run a cold tap about 5 minutes until the water runs clear.
20″ or 10″? Both are 4.5″ across; only the length differs, and they don’t swap. If your housing takes standard 20″ × 4.5″ (BB) cartridges — often called Big Blue® size — this is your size†. Local pickup in San Diego is free: choose Local Pickup at checkout and skip the shipping on this heavy cartridge.
Compatible housings & replacement cartridges
CATKDF85-20BB is a standard 20″ × 4.5″ catalytic carbon + KDF-85 cartridge, rated 25 micron. It fits the housings below and can replace the same-size cartridges listed after them. The media mix differs from brand to brand, so check the right-hand column.*
Housings & systems it fits
Replacement for Home Master CFKDF85GCC-20BB & Express Water FLTWH2045K
Switching from a standard GAC + KDF-85 cartridge
These same-size cartridges pair KDF-85 with regular (non-catalytic) carbon. CATKDF85-20BB fits the same housing and adds catalytic carbon for chloramine; most of them hold more KDF, so expect less KDF capacity from ours.
Also searched as: CFKDF85GCC20BB · FLTWH2045K · AF202215BB · KDF8520BB · FIKDF8520BB · IFSMKDF85020B · FG25BKS · KDF85 catalytic carbon 4.5 x 20 · KDF 85 filter 20 inch · chloramine and H2S filter 20×4.5
Check before you order. Your old cartridge should be about 4.5″ across and 20″ long, with a flat gasket on the top end. Not sure? Send us a photo of the cartridge label and we’ll confirm the fit.
Iron staining too? KDF-85 isn’t a full iron filter. Add IRON-20BB for clear-water iron.
Fit questions
Can I use CATKDF85-20BB in place of the Home Master CFKDF85GCC-20BB?
Yes. Both are 20″ × 4.5″ cartridges with granular catalytic carbon and KDF-85, so it fits Home Master whole house systems and other standard 20″ housings. The Home Master cartridge lists 3 lb of KDF-85; ours is about 15% KDF-85 and leans toward catalytic carbon (chloramine). If you bought it mainly for H₂S or metals, start on a shorter change interval.
I use an Aries or ResinTech AF-20-2215-BB. Can I switch?
It fits the same housing. The AF-20-2215-BB pairs coconut GAC with 5 lb of KDF-85; ours pairs catalytic carbon with less KDF-85. So ours adds chloramine reduction, and the Aries holds more KDF for odor and metals.
Will it fit my iSpring or Express Water 20″ system?
Yes. Both use standard 20″ × 4.5″ housings. Put CATKDF85-20BB in the carbon / KDF stage (where the iSpring FG25B-KS or Express Water FLTWH2045K goes), after the sediment cartridge.
CATKDF85-20BB or CAT-20BB — which do I need?
Both reduce chloramine and chlorine. Choose this one when you also want help with H₂S odor or some heavy metals. If chloramine is the only issue, CAT-20BB has more catalytic carbon for that job and costs less.
When should I change it?
On plain chlorinated water, every 6–12 months depending on use. On chloraminated water, sooner — about 6 months at most. Change it sooner too if the rotten-egg odor or chlorine smell comes back.
Will it fix a strong rotten-egg smell from my well?
It helps at low-to-moderate levels. A strong smell needs an oxidation or aeration system ahead of any cartridge. If only the hot water smells, the cause is usually the water heater’s anode rod, not the water supply.
Building a full stack?
† Big Blue® and Pentek® are registered trademarks of Pentair. My Water Club is not affiliated with, sponsored by or endorsed by Pentair. These names are used only to describe size and compatibility.
KDF® is a registered trademark of KDF Fluid Treatment, Inc. and is named only to identify the media used in this cartridge.
* 3M and Aqua-Pure, APEC, Aries, Brio, Express Water, Home Master, iFilters, iSpring, ResinTech, SimPure, Tier1 and VIQUA, and their model names, are trademarks of their respective owners. My Water Club is not affiliated with, sponsored by or endorsed by these companies, and this cartridge is not made by them. Brand and model names are used only to identify housings this cartridge fits and the same-size cartridges it can replace. Compatibility is based on the standard 20″ × 4.5″ size; please check your housing before ordering.










Reviews
There are no reviews yet.