Durable plastic mounting clips that hold standard 2″ diameter inline water filters securely in place — keeps filters positioned and reduces strain on tubing connections. Screws to any flat surface; 2 clips per pack.

What it does

These mounting clips (also called mounting brackets or saddle clamps) wrap around a standard 2″ diameter inline water filter and screw to a wall, cabinet, or other flat surface. Once secured, the filter stays firmly in position — no sagging, no shifting, and less stress on the push-fit tubing connections at each end.

You’ll typically need two clips per filter (one near each end) — so this 2-pack covers one inline filter. If you’re mounting a multi-filter setup (e.g. a post-carbon + mineral filter), grab one pack per filter. Mounting screws are not included — use #6 or #8 screws appropriate for your mounting surface.

Key benefits

• ✓Fits 2″ diameter inline filters — the standard inline cartridge size
• ✓Secure mounting — holds filters in position, reduces sag and tubing strain
• ✓Horizontal or vertical — mount your filters whichever way the install requires
• ✓Works with countertop RO, under-sink RO & inline water filtration setups
• ✓Durable plastic — won’t corrode or rust
• ✓2 clips per pack with automatic quantity discounts

Specifications

Compatibility

Often used with

Good to know before you buy

• Two clips per filter — position one near each end of the inline filter for even support.
• Hold each clip against the mounting surface and mark the screw holes.
• Snap the inline filter into the mounted clips, then connect tubing and check for leaks before pressurizing.
• Can be mounted horizontally or vertically depending on your space and filter orientation.