Durable plastic mounting clips that hold standard 2.5″ diameter components — 10″×2.5″ slim filter housings, RO membrane housings, and similar cylindrical parts. Keeps your system stable and reduces strain on connections. 2 clips per pack.

What it does

These mounting clips (also called mounting brackets or saddle clamps) wrap around a standard 2.5″ diameter component — such as a 10″×2.5″ slim filter housing, an RO membrane housing, or any similar cylindrical part — and screw to a wall, cabinet, or panel. Once secured, the component stays firmly in position with no sagging, shifting, or stress on tubing connections.

You’ll typically need two clips per housing (one near each end) — so this 2-pack covers one housing or component. If you’re mounting a multi-stage system, grab one pack per housing. Mounting screws are not included — use #6 or #8 screws appropriate for your mounting surface.

Key benefits

• ✓Fits 2.5″ diameter components — slim 10″×2.5″ housings, membrane housings & more
• ✓Secure mounting — holds filters in position, reduces sag and tubing strain
• ✓Horizontal or vertical — mount your filters whichever way the install requires
• ✓Works with countertop RO, under-sink RO & inline water filtration setups
• ✓Durable plastic — won’t corrode or rust
• ✓2 clips per pack with automatic quantity discounts

Specifications

Compatibility

Often used with

Good to know before you buy

• Two clips per housing — position one near each end of the housing or component for even support.
• Hold each clip against the mounting surface and mark the screw holes.
• Snap the housing into the mounted clips, then connect tubing and check for leaks before pressurizing.
• Can be mounted horizontally or vertically depending on your space and filter orientation.