A 3-way tee with one 1/4″ MNPT threaded port and two 1/4″ OD quick-connect tubing ports. Branch two 1/4″ tubing lines from a single threaded port on a filter, valve, or manifold.

What it does

This T-splitter has a 1/4″ MNPT threaded port on one leg and two 1/4″ OD quick-connect ports on the other two. It screws into a threaded component and branches the line into two tubing runs.

Use it to add an inline filter, gauge, or secondary device at a threaded connection point while keeping the main 1/4″ line running.

Key benefits

• ✓1/4″ MNPT × 1/4″ QC × 1/4″ QC — thread + dual tube
• ✓Branch two tubing lines from one threaded port
• ✓PTFE tape on thread; O-ring on QC ports
• ✓Compact tee design
• ✓Works with RO systems, inline filters & water filtration
• ✓Automatic quantity discounts

Specifications

Compatibility

Often used with

Good to know before you buy

• Wrap PTFE tape on the threaded port before installing.
• Push 1/4″ tubing into both QC ports until seated.
• Check all connections for leaks.