Dual Filter Mounting Bracket for Heavy Duty BB Housings – 2-Stage, 10″ & 20″ × 4.5″, 1″ Port, White Powder-Coated Steel

$24.95

  • Dual wall bracket for 2-stage heavy-duty BB whole house systems
  • Fits 10″ and 20″ × 4.5″ housings with 1″ ports
  • White powder-coated steel. Takes the load off your plumbing
  • Hardware not included. Use our 5/16″ × 1″ bracket screws for the housings
  • For the Big Blue®† housing size

† Big Blue® is a registered trademark of Pentair. Used only to describe size; My Water Club is not affiliated with Pentair.

Description

Holds
2 housings
Housing Size
10″ & 20″ × 4.5″
Port Size
1″
Material
Powder-coated steel
Weight
3 lb

This dual filter mounting bracket wall-mounts a 2-stage heavy-duty BB whole house system. The white powder-coated steel bracket carries the weight of both housings so your plumbing doesn’t have to, and it fits both 10″ and 20″ × 4.5″ housings with 1″ ports.

What the dual filter mounting bracket does

Two water-filled heavy-duty housings are heavy, too heavy to hang from the inlet and outlet pipes. Each housing cap screws to this 2-stage filter bracket, and the bracket screws to the wall, so the system stays put and your 1″ fittings and union nipple aren’t carrying the load.

The bracket also holds the two housings level and evenly spaced, in line with the union nipple between them, so cartridge changes are quick and nothing twists when you loosen a sump. The same whole house filter bracket works for 10″ and 20″ housings, because the bracket holds the caps and housing length doesn’t matter. It’s a good fit for garages, basements and utility rooms.

Key benefits

  • ✓Heavy-duty powder-coated steel — sized for two water-filled heavy-duty housings
  • ✓Fits 10″ and 20″ × 4.5″ housings — one bracket for either length
  • ✓Keeps housings level and evenly spaced for easier cartridge changes
  • ✓Takes the load off inlet/outlet plumbing and the 1″ union nipple
  • ✓White powder-coat finish — clean look, resists corrosion indoors
  • ✓Pre-drilled to match My Water Club heavy-duty BB housings

Specifications

Fits Heavy-duty 10″ & 20″ × 4.5″ (BB) housings with 1″ ports — the Big Blue® housing size†
Housings supported Two (2-stage system)
Port size 1″
Material Powder-coated steel
Finish / color White powder coat
Mount type Wall mount (indoor or protected locations)
Dimensions 16 × 8 × 8 in
Weight 3 lb (48 oz)
Hardware Not included — wall screws/anchors for your wall type; 5/16″ × 1″ housing screws sold separately
Brand MyWaterClub
SKU BR-2-BB

Compatibility

✓ Works with
  • My Water Club heavy-duty 10″ × 4.5″ housings and 2-stage BB systems
  • 10″ and 20″ × 4.5″ housings with 1″ ports
  • Other brands’ heavy-duty housings — compare the cap’s screw-hole pattern and the spacing between housings before buying
× Not for
  • Slim 10″ × 2.5″ housings (use the slim dual bracket)
  • 1- or 3-stage systems — use the single or triple heavy-duty bracket
  • Outdoor or exposed locations

Often used with

Heavy Duty Housing (10″ × 4.5″)
1″ NPT with brass inserts + pressure release (2 needed)

View product →

1″ Union Nipple
Connects housing to housing (1 needed for 2-stage)

View product →

5/16″ × 1″ Bracket Screws
Mount each housing cap to the bracket (4-pack)

View product →

Dual-Stage Filter Set (SC-10BB)
Sediment + CTO carbon block

View product →

Heavy Duty Housing Wrench
For cartridge changes on 4.5″-wide housings

View product →

Browse all heavy-duty BB parts → · 10″ × 4.5″ BB cartridges & sets →

Good to know before you buy

  • Hardware is not included. Choose wall screws and anchors for your wall type (wood stud, masonry, etc.), and order the 5/16″ × 1″ housing screws separately.
  • Mount into studs or solid backing. Two water-filled 10″ housings weigh roughly 25–40 lb, and 20″ housings weigh more. Drywall anchors alone loosen over time.
  • Leave room below to drop the sumps: about 12″ under 10″ housings and 22″ under 20″ housings.
  • Level the bracket before fully tightening it. A tilted bracket makes cartridge changes harder and stresses the plumbing.
  • Indoor or protected locations only — not for outdoor exposure.
  • Cutting into your main water line? If you’re not comfortable soldering or working with PEX, a plumber is recommended.

† Big Blue® is a registered trademark of Pentair. My Water Club is not affiliated with, sponsored by or endorsed by Pentair. The name is used only to describe size.

Additional information

Weight 3 lbs
Dimensions 1 × 6 × 8 in

Reviews

There are no reviews yet.

Be the first to review “Dual Filter Mounting Bracket for Heavy Duty BB Housings – 2-Stage, 10″ & 20″ × 4.5″, 1″ Port, White Powder-Coated Steel”