Heavy Duty BB Whole House Filter Housing – 20″ × 4.5″, 1″ NPT Brass Thread Inserts, Pressure Release Button, Blue

$54.90

  • Heavy-duty whole house filter housing for standard 20″ × 4.5″ cartridges
  • 1″ NPT inlet & outlet with brass thread inserts: metal threads, less risk of stripping
  • Pressure release button for cleaner, easier filter changes
  • Blue polypropylene sump, black cap · ships assembled with the O-ring in place
  • Max 85 PSI · cold water only · typical life about 5 years
  • Buy 2 or more and save · free local pickup in San Diego

Description

This heavy-duty BB whole house filter housing takes standard 20″ × 4.5″ cartridges. It has 1″ NPT ports with brass thread inserts and a pressure release button for cleaner filter changes, and it ships assembled with the sump O-ring in place.

Fits cartridge
20″ × 4.5″
Ports
1″ NPT
Thread inserts
Brass
Pressure release
Yes
Max pressure
85 PSI

What this 20″ × 4.5″ whole house filter housing does

A 20″ × 4.5″ cartridge holds about twice the media of a 10″ × 4.5″ one, so it goes longer between changes and handles whole house flow with less pressure drop. That makes the 20″ housing the usual choice for larger homes, well water and anywhere you would otherwise change a 10″ cartridge too often. This housing has a heavy polypropylene body, a blue sump and 1″ NPT inlet and outlet ports.

Two features make it easier to live with than a basic housing:

  • Brass thread inserts in the inlet and outlet ports. Your fittings thread into metal instead of plastic, so the ports are much less likely to strip or crack from installer torque and years of temperature changes.
  • Pressure release button on the cap. After you close the shut-off valves, press it to let the trapped pressure out, and the sump comes off without a spray of water. Press it again after a filter change to let the air out.

It takes standard 20″ × 4.5″ (BB) cartridges from any brand: sediment, carbon block, GAC and specialty media such as catalytic carbon, KDF, iron and scale. Use it alone as a single-stage filter, join two or three with 1″ union nipples to build a multi-stage system, or use it to replace a cracked or aging 20″ housing in an existing system — see the compatibility list below.

Key benefits

  • ✓ Brass thread inserts — metal-reinforced 1″ ports instead of plastic threads
  • ✓ Pressure release button — relieve pressure before opening the sump
  • ✓ 1″ NPT ports — sized for whole house flow
  • ✓ Takes standard 20″ × 4.5″ cartridges from any brand
  • ✓ Twice the cartridge length of a 10″ housing — longer between changes
  • ✓ Molded IN / OUT arrows on the cap
  • ✓ Opaque blue sump blocks light, which helps limit algae growth inside
  • ✓ Same cap size as our 10″ housing — same wrench and wall brackets

Specifications

Fits Standard 20″ × 4.5″ (BB) cartridges — same size as Pentair Pentek Big Blue® #20 cartridges†
Ports 1″ NPT female (inlet & outlet), IN / OUT arrows on the cap
Thread inserts Brass (metal-reinforced)
Pressure release Built-in red button on the cap
Max pressure 85 PSI — install a pressure regulator if your line pressure is higher
Water Cold water only
Material / color Heavy-duty polypropylene, blue sump, black cap
In the box Housing (cap + sump), assembled, with the sump O-ring in place. Cartridge, bracket and wrench sold separately.
Typical service life About 5 years
Sold as Single housing (1 unit)
Brand MyWaterClub
SKU HOUSING20BB

Which 20″ × 4.5″ cartridge goes in it?

Every My Water Club 20″ × 4.5″ cartridge fits this housing. Tap a name to view it.

Cartridge Type Best for
Stage 1 — Sediment
SED5-20BB Melt-blown sediment · 5 µm City water, lighter sediment · disposable, lowest cost
SED5-PLT-20BB Washable pleated polyester · 5 µm Well water or heavy sediment · rinse and reuse
Carbon stages
GAC-20BB Granular activated carbon · 25 µm High-flow chlorine, taste & odor reduction
CTO-20BB Carbon block (CTO) · 10 µm Everyday chlorine, taste & odor polishing
CACB-20BB Coconut carbon block · 10 µm Coconut carbon, the usual pick for taste & odor
Specialty media
CAT-20BB Catalytic activated carbon Chloramine (city water) and rotten-egg (H2S) odor
CATKDF85-20BB Catalytic carbon + KDF-85 Chloramine plus H2S odor and some heavy metals
IRON-20BB Iron-reduction + softening resin Clear-water (dissolved) iron · light softening
SCALE-20BB Polyphosphate scale inhibitor Scale protection for heaters & appliances

Browse all 20″ × 4.5″ BB cartridges → · Heavy-duty BB parts →

Compatible housings & cartridges

HOUSING20BB is a standard heavy-duty 20″ × 4.5″ housing with 1″ NPT ports. It can replace the 1″-port housings below and takes the same-size cartridges listed after them.*

Housings it can replace

Brand Their housing / system Note
My Water Club WHS-1S-20BB, WHS-2SC-20BB and WHS-3SGC-20BB systems — any stage Exact replacement
Pentek† 150233 Big Blue® #20 housing, 1″ NPT with pressure relief† Not the 1½″-port 150235
Hydronix HF45-20BLBK10PR · HF45-20BLBK10 1″ ports only (not the ¾″ or 1½″ HF45 versions)
iSpring HB28B · housings in WGB22B and WGB32B systems 1″ ports
Express Water PRTBB2045HBG · housings in 4.5″ × 20″ whole house systems Gauge and bracket not included here
APEC HBB-20 · CB1 / CB2 / CB3 series 20″ systems 1″ ports
SpiroPure SP-FH-BL10PR-20BB 1″ ports
SimPure DB20 / DB20P 20″ whole house housings 1″ ports
Geekpure 20″ × 4.5″ housing, 1″ NPT brass port
US Water Systems 4.5″ × 20″ housing, 1″ ports

Other brands’ cartridges it takes

Brand 20″ × 4.5″ cartridges
Pentek† DGD-5005-20 · R50-20BB · EP-20BB · RFC-20BB
iSpring FP25B · FC25B · FM25B
Express Water FLTWH2045S and other 4.5″ × 20″ cartridges
APEC FI-SED20-BB · FI-CHLORAMINE20-BB
Hydronix SPC-45-2005 and other 4.5″ × 20″ cartridges
Aries AF-20-1042-BB
US Water Systems USWPF-4520-05
Tier1 ECP5-20 and other 20″ × 4.5″ cartridges

Also searched as: 150233 · HF4520BLBK10PR · HB28B · PRTBB2045HBG · HBB20 · 20×4.5 filter housing · 4.5 x 20 water filter housing 1 inch · 20 inch whole house filter housing with pressure relief · big blue 20 housing replacement

Check before you order. Your old housing should take a cartridge about 4.5″ across and 20″ long and have 1″ threaded ports. Housings with ¾″ or 1½″ ports need adapters or a different housing.

Replacing one housing in another brand’s multi-stage system? The cartridge and ports will match, but port height and bracket hole spacing can differ slightly between makers. If the union nipples or bracket screws don’t line up, replace the whole set or mount it on our single or dual bracket. Not sure? Send us a photo and we’ll check.

Fit questions

Can it replace a Pentek 150233 Big Blue® #20 housing?

Yes. It takes the same 20″ × 4.5″ cartridges and has 1″ NPT ports and a pressure release button. Move your cartridge across, and check the bracket screws line up (see the box above) — if not, use our heavy-duty wall bracket.

One housing in my 3-stage system cracked. Can I replace just that one?

Usually yes, if the system uses 1″ ports and 20″ × 4.5″ cartridges. Port height and bracket hole spacing can differ a little between makers, so the union nipples may not line up. If they don’t, replace all housings in the set, or send us a photo and we’ll check it.

Can I use just the sump on my old cap?

We don’t recommend it. Caps and sumps from different makers aren’t guaranteed to thread or seal together. Replace the whole housing — and if the cap is the same age, it is due anyway.

Will a 10″ cartridge work in it?

No. A 10″ cartridge won’t seal in a 20″ sump. For 10″ × 4.5″ cartridges use HOUSING10BB.

Does it come with a wrench or a bracket?

No, the housing is sold on its own. Add the heavy-duty housing wrench and a wall bracket if you need them.

Can it go on a hot water line?

No. It is for cold water only.

Often used with

5 Micron Sediment Cartridge
SED5-20BB — Stage 1 pre-filter

View product →

Carbon Block Cartridge
CTO-20BB — chlorine, taste & odor

View product →

Heavy Duty Housing Wrench
Fits this housing (1″ ports)

View product →

Heavy Duty Single Bracket
Wall mount — also dual & triple

View product →

1″ Union Nipple
Joins housings into a 2- or 3-stage system

View product →

PTFE Thread Seal Tape
For the inlet/outlet pipe threads

View product →

Installer & plumber bulk pricing
Automatic quantity discounts apply as you scale up. Buying housings in quantities of 10 or more? Contact us for installer pricing. Local pickup in San Diego is free.

Good to know before you buy

  • Check your water pressure. The housing is rated 85 PSI. If your pressure runs higher, install a pressure regulator or 70 PSI pressure limiting valve ahead of it.
  • Leave room underneath. A 20″ housing needs a couple of inches of clearance below the sump so you can unscrew it and lift the cartridge out. A full 20″ sump is heavy — support it with both hands.
  • At every filter change: close the shut-off valves, press the pressure release button until the hissing stops, then loosen the sump.
  • Don’t install where it can freeze. Water expands as it freezes and will crack the housing.
  • Use PTFE tape on the port threads. The brass inserts thread cleanly, so there’s no need to over-torque.
  • Hand-tighten the sump snugly, then add up to a quarter turn with the housing wrench. Over-tightening can crack the plastic and pinch the O-ring.
  • Lightly grease the O-ring with food-grade silicone grease at each filter change.
  • Keep it out of direct sunlight. Replace the housing every 5 years, or sooner if you see cracks, stress marks around the threads, or seepage at the seal.

† Big Blue® and Pentek® are registered trademarks of Pentair. My Water Club is not affiliated with, sponsored by or endorsed by Pentair. These names are used only to describe size and compatibility.

* APEC, Aries, Express Water, Geekpure, Hydronix, iSpring, SimPure, SpiroPure, Tier1 and US Water Systems, and their model names, are trademarks of their respective owners. My Water Club is not affiliated with, sponsored by or endorsed by these companies, and this housing is not made by them. Brand and model names are used only to identify housings this one can replace and cartridges it takes. Compatibility is based on the standard 20″ × 4.5″ cartridge size and 1″ NPT ports; please check your system before ordering.

Additional information

Weight 8 lbs
Dimensions 24 × 9 × 9 in

Reviews

There are no reviews yet.

Be the first to review “Heavy Duty BB Whole House Filter Housing – 20″ × 4.5″, 1″ NPT Brass Thread Inserts, Pressure Release Button, Blue”