Description
A bone char water filter in heavy-duty 10″ × 4.5″ (BB) size — the fluoride stage of our range: natural bone char media that helps reduce fluoride along with heavy metals, chlorine, taste, and odor in one whole-house cartridge.
What this bone char water filter does
Bone char is the classic natural media for fluoride. Made by carbonizing animal bone, it’s rich in a calcium-phosphate mineral (hydroxyapatite) that attracts fluoride ions — something standard activated carbon doesn’t do. Under suitable conditions, it helps reduce fluoride at low-to-moderate levels, and the same mineral structure helps reduce heavy metals such as lead, cadmium, zinc, and copper, and can help reduce arsenic.
Because bone char is also a form of activated carbon, it reduces chlorine, taste, and odor as it works, so it can stand in as a carbon stage while it targets fluoride.
The heavy-duty 10″ × 4.5″ format holds more media than a slim 2.5″ cartridge, for a whole-house line. Run it after a sediment stage; on chloraminated water or where you want the most taste polishing, follow it with a catalytic or carbon block stage. It fits the same standard housings as other 10″ × 4.5″ bone char cartridges — see the compatibility list below.
Key benefits
- ✓ Helps reduce fluoride — bone char’s specialty
- ✓ Helps reduce heavy metals: lead, cadmium, zinc & copper
- ✓ Helps reduce arsenic under suitable conditions
- ✓ Reduces chlorine, taste & odor as it works
- ✓ Natural, time-proven filtration media
- ✓ Replaces same-size bone char cartridges from Aries, ResinTech & US Water Systems*
Specifications
Helps reduce
What this cartridge targets — and what it isn’t built for.
Lead · cadmium · zinc · copper
Arsenic
Chlorine
Taste & odor
Fine sediment
Chloramine
Scale / hardness
Dissolved solids (TDS)
Which 10″ × 4.5″ cartridge do I need?
The MyWaterClub heavy-duty 10″ × 4.5″ range by stage. Your current filter is highlighted — tap any other name to view it.
Browse all 10″ × 4.5″ BB cartridges & sets → · Specialty media →
Good to know before you buy
Fluoride reduction depends on contact time. At full whole-house flow, water moves through the media quickly, so expect help at low-to-moderate fluoride levels rather than complete removal. For drinking water, pair this whole-house stage with point-of-use filtration (bone char or RO) at the tap — that’s the setup we recommend when fluoride matters most.
It’s a natural, animal-derived media. Bone char is made from carbonized cattle bone, so it’s not suitable for households that prefer vegan products.
Flush thoroughly on install. Bone char sheds harmless dark fines at first — run water to drain until it’s fully clear before use, a few minutes longer than a standard carbon cartridge.
Sediment first. Keep a sediment cartridge (SED5-10BB) ahead of it so the specialty media spends its capacity on fluoride and metals, not dirt.
Compatible housings & replacement cartridges
BC-10BB is a standard 10″ × 4.5″ bone char cartridge, rated 25 micron. It fits the housings below and can replace the same-size bone char cartridges listed after them.*
Housings & systems it fits
Replacement for Aries & ResinTech AF-10-1091-BB and US Water USWF-4510-BC
Switching from an activated alumina fluoride cartridge
These same-size cartridges use a different fluoride media. BC-10BB fits the same housing, but results differ — see the fit questions.
Also searched as: AF101091BB · USWF4510BC · bone char 4.5 x 10 · fluoride filter 10×4.5 whole house · bone char big blue 10 inch
Check before you order. Your old cartridge should be about 4.5″ across and 9¾–10″ long, with an open center hole at both ends. Not sure? Send us a photo of the cartridge label and we’ll confirm the fit.
On chloramine-treated city water? Bone char doesn’t target chloramine. Add catalytic carbon as another stage.
Fit questions
Can I use BC-10BB in place of the Aries AF-10-1091-BB?
Yes. Both are 10″ × 4.5″ cartridges filled with bone char, so BC-10BB fits the same housing. BC-10BB is rated 25 micron nominal; change it every 3–12 months depending on your water.
I use an activated alumina fluoride cartridge (like the Aries AF-10-3690-BB). Can I switch?
It fits the same housing, but the media is different. Activated alumina cartridges are rated for very low flow (about 0.2–0.25 GPM), which suits a single tap. Bone char cartridges are rated for more flow (the Aries AF-10-1091-BB is rated 3 GPM) and also reduce chlorine, taste and odor. At full whole-house flow, expect help with fluoride, not complete removal.
Will it fit my GE GXWH40L?
Yes. The GXWH40L takes standard 10″ × 4.5″ cartridges. Put BC-10BB after a sediment stage; if your system has only one housing, use it on water that is already low in sediment.
Where does it go in my system?
After a sediment cartridge (Stage 1), usually as Stage 2. If you want the most taste polishing, add a carbon block such as CTO-10BB or CACB-10BB after it.
The first water looked dark after the change. Is that normal?
Yes. New bone char sheds harmless dark fines. Run water to drain until it runs fully clear, a few minutes longer than a standard carbon cartridge.
Building a full stack?
† Big Blue® and Pentek® are registered trademarks of Pentair. My Water Club is not affiliated with, sponsored by or endorsed by Pentair. These names are used only to describe size and compatibility.
* American Plumber, Aries, Culligan, Express Water, GE, Intelifil, iSpring, ResinTech, 3M and Aqua-Pure and US Water Systems, and their model names, are trademarks of their respective owners. My Water Club is not affiliated with, sponsored by or endorsed by these companies, and this cartridge is not made by them. Brand and model names are used only to identify housings this cartridge fits and the same-size cartridges it can replace. Compatibility is based on the standard 10″ × 4.5″ size; please check your housing before ordering.










Reviews
There are no reviews yet.