Description
A premium coconut carbon block filter in heavy-duty 10″ × 4.5″ (BB) size: extruded coconut-shell carbon chosen for chlorine, taste, and odor reduction at whole-house flow — with a long 6–12 month service life.
What this coconut carbon block filter does
The CACB-10BB is our premium carbon polishing stage for whole-house systems. It’s built from extruded coconut-shell carbon — a carbon known for its fine micropore structure, which is what coconut carbon is prized for: strong adsorption of chlorine and the small organic compounds behind off-tastes and odors.
Because the block is extruded as one solid piece, water can’t channel around the media — it has to flow through the carbon. The 10-micron nominal rating also captures fine sediment that passes a coarser pre-filter, so it polishes clarity along with taste.
The heavy-duty 10″ × 4.5″ format carries enough carbon to treat whole-house flow, with a typical 6–12 month service life. Choose this cartridge when taste at every tap is the priority, not just at the kitchen sink.
Key benefits
- ✓ Premium extruded coconut-shell carbon block
- ✓ Helps reduce chlorine & organic compounds
- ✓ Coconut carbon: the usual pick for taste & odor
- ✓ 10-micron fine sediment capture improves clarity
- ✓ Typical life 6–12 months
- ✓ Replaces same-size carbon blocks from Hydronix, iSpring, Watts & more*
Specifications
Helps reduce
What this cartridge targets — and what it isn’t built for.
Bad taste
Odor
Organic compounds
Fine sediment
Chloramine
Iron / H₂S
Scale / hardness
Dissolved solids (TDS)
Which 10″ × 4.5″ cartridge do I need?
The MyWaterClub heavy-duty 10″ × 4.5″ range by stage. Your current filter is highlighted — tap any other name to view it.
Browse all 10″ × 4.5″ BB cartridges & sets → · Specialty media →
Good to know before you buy
Coconut vs. standard CTO. Both reduce chlorine, taste, and odor. Coconut carbon is the usual pick for taste polishing, and this cartridge is rated for a 6–12 month service life. If you just want dependable chlorine reduction at the lowest cost, the standard CTO-10BB does the job; if taste is the priority, this is the upgrade.
Always run sediment first. Put a sediment cartridge (SED5-10BB) ahead of this one so the carbon spends its life on chlorine and taste, not on dirt.
Chlorine, not chloramine. Coconut carbon block handles chlorine well; chloramine-treated water needs catalytic carbon for effective reduction. Check your utility’s water report if you’re not sure which your city uses.
Compatible housings & replacement cartridges
CACB-10BB is a standard 10″ × 4.5″ coconut shell carbon block, rated 10 micron. It fits the housings below and can replace the same-size carbon block cartridges listed after them. Where theirs is rated 5 micron, CACB-10BB filters a little more coarsely.*
Housings & systems it fits
Replacement for Hydronix CB-45-1010, iSpring FC15B, Watts PWCB10FFP & more
Also searched as: EPMBB · 15578243 · CB451010 · FC15B · USWCB451010 · coconut carbon block 10×4.5
Check before you order. Your old cartridge should be about 4.5″ across and 9¾–10″ long, with an open center hole at both ends. Not sure? Send us a photo of the cartridge label and we’ll confirm the fit.
On chloramine-treated city water? Coconut carbon block is not built for chloramine. Choose catalytic carbon for that stage instead.
Fit questions
Does CACB-10BB replace the Pentek EPM-BB?
It fits the same Big Blue® #10 housings† in the same 10″ × 4.5″ size, with the same 10 micron nominal rating. CACB-10BB is made from coconut shell carbon.
Can I use it instead of the iSpring FC15B in my WGB21B?
Yes, it fits Stage 2 of the WGB21B. The FC15B is rated 5 micron and CACB-10BB is rated 10 micron, so keep a sediment filter in Stage 1 as usual.
Will it fit my Culligan HD-950A or American Plumber W10-PR?
Yes. Both take standard 10″ × 4.5″ cartridges. Put CACB-10BB in the carbon stage, after the sediment filter.
Coconut block or standard carbon block?
Both reduce chlorine, taste and odor. Coconut carbon is the usual pick when taste matters most, and this cartridge is rated for 6–12 months. CTO-10BB is the lower-cost option.
The first water looked gray. Is that normal?
Yes. New carbon can release a few harmless fines. Run water to drain for 3–5 minutes after install until it runs clear.
Building a full stack?
† Big Blue® and Pentek® are registered trademarks of Pentair. My Water Club is not affiliated with, sponsored by or endorsed by Pentair. These names are used only to describe size and compatibility.
* 3M and Aqua-Pure, American Plumber, Axeon, ClearChoice, Culligan, Express Water, Franklin, GE, Hydronix, iSpring, SpiroPure, Tier1, US Water Systems, USWF, Watts and Whirlpool, and their model names, are trademarks of their respective owners. My Water Club is not affiliated with, sponsored by or endorsed by these companies, and this cartridge is not made by them. Brand and model names are used only to identify housings this cartridge fits and the same-size cartridges it can replace. Compatibility is based on the standard 10″ × 4.5″ size; please check your housing before ordering.










Reviews
There are no reviews yet.