Description
A premium high-flow coconut shell GAC filter in heavy-duty 10″ × 4.5″ (BB) size: coconut-shell granular activated carbon chosen for chlorine, taste, odor, and VOC reduction — with the minimal pressure drop only a GAC bed can give.
What this coconut shell GAC filter does
The CGAC-10BB fills its heavy-duty 10″ × 4.5″ shell with premium coconut-shell granular activated carbon. As water flows through the carbon bed, the granules adsorb chlorine and the organic compounds (VOCs) behind bad taste and odor — and coconut carbon’s finer micropore structure makes it a favorite for taste polishing and small organic molecules.
You keep GAC’s signature advantage: flow. Water moves through a granular bed far more freely than through a solid carbon block, so this cartridge treats whole-house flow with minimal pressure drop. The coarse 25-micron rating reflects its role — a chemical-adsorption stage, not a fine particle filter.
Think of it as the best of both worlds for a two-housing system: coconut carbon’s taste performance at GAC’s flow rate. In three-housing systems it runs as the pre-carbon stage — sediment first, CGAC second, and optionally a carbon block as the final polish.
Key benefits
- ✓ Premium coconut-shell activated carbon media
- ✓ Reduces chlorine, bad taste & odor house-wide
- ✓ Helps reduce organic chemicals (VOCs)
- ✓ High flow with low pressure drop — GAC’s specialty
- ✓ Coconut carbon: the usual pick for taste & odor
- ✓ Replaces same-size GAC cartridges from Culligan, American Plumber, Watts & more*
Specifications
Helps reduce
What this cartridge targets — and what it isn’t built for.
Bad taste
Odor
Organic chemicals (VOCs)
Fine sediment
Chloramine
Iron / H₂S
Scale / hardness
Which 10″ × 4.5″ cartridge do I need?
The MyWaterClub heavy-duty 10″ × 4.5″ range by stage. Your current filter is highlighted — tap any other name to view it.
Browse all 10″ × 4.5″ BB cartridges & sets → · Specialty media →
Good to know before you buy
Coconut GAC vs. standard GAC. Both flow freely and reduce chlorine. Coconut carbon’s finer micropore structure adsorbs small taste- and odor-causing organics more effectively — if you’re choosing GAC for drinking-water taste, this is the upgrade. If you just want bulk chlorine knockdown at the lowest cost, GAC-10BB does the job.
GAC vs. carbon block. A granular bed gives you maximum flow; a block (CTO / CACB) gives you finer 10-micron filtration and polishing. Best of both: run this cartridge ahead of a block in a 3-stage system.
Sediment first, flush on install. Keep SED5-10BB ahead of any carbon stage, and run new GAC to drain for a few minutes until the harmless carbon fines clear.
Compatible housings & replacement cartridges
CGAC-10BB is a standard 10″ × 4.5″ coconut shell GAC cartridge, rated 25 micron. It fits the housings below and can replace the same-size granular carbon (GAC) cartridges listed after them.*
Housings & systems it fits
Replacement for Culligan RFC-BBSA, American Plumber WRC25HD, Watts PWGAC & more
Also searched as: GACBB · 15515343 · RFCBBSA · WRC25HD · UDF10BP · coconut GAC 10×4.5
Check before you order. Your old cartridge should be about 4.5″ across and 9¾–10″ long, with an open center hole at both ends. Not sure? Send us a photo of the cartridge label and we’ll confirm the fit.
On chloramine-treated city water? Standard and coconut GAC are not built for chloramine. Choose catalytic carbon for that stage instead.
Fit questions
Does CGAC-10BB replace the Pentek GAC-BB?
It fits the same Big Blue® #10 housings† in the same 10″ × 4.5″ size, and both are granular activated carbon. CGAC-10BB uses coconut shell carbon and is rated 25 micron.
Will it fit my Culligan HD-950A instead of the RFC-BBSA?
Yes. The HD-950A takes standard 10″ × 4.5″ cartridges. The RFC-BBSA is a 25 micron radial-flow GAC; CGAC-10BB is a 25 micron coconut shell GAC.
Can I use it instead of a carbon block, like the iSpring FC15B?
It fits the same housing and gives higher flow, but a GAC filters more coarsely (25 vs. 5–10 micron). For the finest taste polishing, keep a block as the last stage — see CACB-10BB.
Coconut or standard GAC?
Both reduce chlorine at high flow. Coconut carbon is the choice for taste and odor; GAC-10BB is the lower-cost option for chlorine.
The water looked gray after I installed it. Is that normal?
Yes. New granular carbon releases harmless carbon fines. Run water to drain for 3–5 minutes after install until it runs clear.
Building a full stack?
† Big Blue® and Pentek® are registered trademarks of Pentair. My Water Club is not affiliated with, sponsored by or endorsed by Pentair. These names are used only to describe size and compatibility.
* 3M and Aqua-Pure, American Plumber, Aries, Culligan, EcoAqua, Express Water, GE, Hydronix, iSpring, Neo-Pure, SpiroPure, US Water Systems, Waterdrop, Watts and Whirlpool, and their model names, are trademarks of their respective owners. My Water Club is not affiliated with, sponsored by or endorsed by these companies, and this cartridge is not made by them. Brand and model names are used only to identify housings this cartridge fits and the same-size cartridges it can replace. Compatibility is based on the standard 10″ × 4.5″ size; please check your housing before ordering.










Reviews
There are no reviews yet.