SKU: IRON-10BB Category: Tag Brand:

Iron Reduction Water Filter Cartridge with Softening Resin, Heavy Duty BB 10″ × 4.5″, 25 Micron — Reduces Dissolved Iron, Manganese & Hardness

$34.95

  • Iron reduction water filter: cation-exchange resin reduces dissolved (clear-water) iron & manganese
  • Helps reduce orange/rust staining on fixtures, sinks & laundry; also reduces some hardness
  • Best for low-to-moderate iron & hardness · not for red/rusty (already-oxidized) water
  • Standard 10″ × 4.5″ size: fits heavy-duty whole house housings, 25 micron
  • Use after a sediment pre-filter (after carbon on chlorinated water) · replace every 2–6 months · max 90 PSI

In stock

<1
$34.95
1
$34.95 each
2 - 4
$32.95 each
5 - 9
$29.95 each
10 - 19
$28.95 each
20+
$27.95 each

Description

An iron reduction water filter in heavy-duty 10″ × 4.5″ (BB) size for clear-water iron: cation-exchange resin that reduces dissolved iron and manganese and takes the edge off hardness, to help cut orange staining on fixtures, sinks, and laundry.

Stage
Specialty stage · after sediment
Size
10″ × 4.5″ BB
Micron
25 µm nominal
Life
2–6 months
Fits
Standard 10″ × 4.5″ BB housings

What this iron reduction water filter does

Dissolved iron is hard to spot: water pours from the tap clear, then leaves orange-brown stains on sinks, toilets, fixtures, and laundry as the iron oxidizes in air. This cartridge works while the iron is still dissolved, using cation-exchange resin — the same media family as a water softener — to capture ferrous (clear-water) iron and manganese as water passes through.

Because it’s softening-type resin, it also reduces hardness (calcium and magnesium). Hardness and iron share the resin’s capacity, so the cartridge works best on water that is low to moderate in both. It’s a light-softening side effect, not a replacement for a water softener.

Run it in a standard heavy-duty 10″ × 4.5″ housing after a sediment stage. It’s for clear-water iron only: if water already comes out red, orange, or rusty, the iron has oxidized into particles, and that needs oxidizing or backwashing iron treatment instead. It fits the same housings as other 10″ × 4.5″ iron cartridges — see the compatibility list below.

Key benefits

  • ✓ Reduces dissolved (ferrous) iron & manganese in clear water
  • ✓ Helps reduce orange/rust staining on fixtures, sinks & laundry
  • ✓ Cation-exchange resin also reduces some hardness (calcium & magnesium)
  • ✓ Helps with metallic taste from iron
  • ✓ Replaces same-size iron cartridges from iSpring, Brio, Applied Membranes & PUREPLUS*
  • ✓ Fits all My Water Club 10″ × 4.5″ systems & HOUSING10BB

Specifications

Cartridge type Iron reduction + softening — ion-exchange resin
Nominal size 10″ × 4.5″ (4.5 × 10), standard BB size
Fits Standard 10″ × 4.5″ (BB) housings — same size as Pentair Pentek Big Blue® #10 cartridges†
Compatible with* iSpring FM15B · Brio RFCTY4510IMR · Applied Membranes C-C4210-I + 11 more brands — full list ↓
Micron rating (nominal) 25 micron
Media Iron-removal / softening cation-exchange resin; polypropylene core & outer shell
Recommended position Specialty stage — after sediment (typically Stage 2); after carbon on chlorinated water
Operating temperature 40 °F – 100 °F (cold water use)
Max pressure 90 PSI
Typical life 2–6 months (shorter with more iron or harder water)
Brand MyWaterClub (made for MyWaterClub)
SKU IRON-10BB

Helps reduce

What this cartridge targets — and what it isn’t built for.

Dissolved (ferrous) iron
Manganese
Hardness (Ca & Mg)
Rust staining
Red / already-oxidized iron
Iron bacteria
Chlorine / taste & odor
H₂S odor
Sediment

Which 10″ × 4.5″ cartridge do I need?

The MyWaterClub heavy-duty 10″ × 4.5″ range by stage. Your current filter is highlighted — tap any other name to view it.

Cartridge Type Best for
Stage 1 — Sediment
SED5-10BB Melt-blown sediment · 5 µm Whole-house pre-filtration · municipal or moderate sediment
SED5-PLT-10BB Washable pleated polyester · 5 µm Well water or heavy sediment · rinse and reuse
Carbon stages — high flow (GAC)
GAC-10BB Granular activated carbon · 25 µm High-flow chlorine, taste & VOC reduction — lowest cost
CGAC-10BB Coconut shell GAC · 25 µm Coconut carbon for taste & VOCs at full GAC flow
Carbon stages — fine polishing (block)
CTO-10BB Carbon block (CTO) · 10 µm Everyday chlorine, taste & odor polishing — lowest cost
CACB-10BB Coconut carbon block · 10 µm The usual pick for taste & odor · 6–12 month life
Specialty media
CAT-10BB Catalytic activated carbon · 25 µm Chloramine-treated city water · chlorine & H₂S
CATKDF85-10BB Catalytic carbon + KDF-85 · 25 µm Chloramine, H₂S & some heavy metals
BC-10BB Bone char · 25 µm Helps reduce fluoride (plus taste & odor)
IRON-10BB (this filter) Iron-removal + softening resin Clear-water (dissolved) iron · light softening
SCALE-10BB Scale-inhibitor media Scale protection for heaters & appliances (does not remove hardness)

Browse all 10″ × 4.5″ BB cartridges & sets → · Specialty media →

Good to know before you buy

The glass test — clear-water or red-water iron? Fill a clear glass from the tap. If the water is clear but turns orange after sitting (or you get stains despite clear water), your iron is dissolved — this is the right cartridge. If the water comes out red, orange, or rusty, the iron is already oxidized into particles; exchange resin won’t fix it, and you need oxidizing or backwashing iron treatment. Not sure? Bring a sample to our San Diego office for a free test, or ask us.

Hardness shares the capacity. The resin takes up calcium and magnesium along with iron, and a 10″ cartridge holds a small amount of resin. Same-size softening cartridges are rated about 2,800 grains — under 300 gallons at 10 grains per gallon of hardness. On hard water the cartridge loads up quickly and iron reduction drops with it; there, a water softener (which also handles low iron) is the better tool.

On chlorinated city water, put carbon first. Chlorine degrades cation-exchange resin over time. On municipal water, run a carbon stage (GAC or CTO) ahead of this cartridge; on well water, where most iron problems are, that’s not a concern.

Shortest interval in the range. Exchange resin is used up as it loads with iron and hardness. Replace every 2–6 months: closer to 2 with higher iron or harder water, and sooner if staining or metallic taste returns.

Compatible housings & replacement cartridges

IRON-10BB is a standard 10″ × 4.5″ iron reduction cartridge with cation-exchange resin. It fits the housings below and can replace the same-size iron and manganese cartridges listed after them.*

Housings & systems it fits

Brand Housing / system model
My Water Club WHS-2SC-10BB-E, WHS-3SGC-10BB-E, WHS-3SGCACB-10BB-A · HOUSING10BB housing — Stage 2 or an added stage
Pentek† Big Blue® #10 (10″ × 4.5″) housings†
Culligan HD-950A heavy-duty housing
GE GXWH40L whole home system
3M Aqua-Pure AP801 whole house housing
American Plumber W10-PR heavy-duty housing
iSpring WGB21BM and WGB31BM iron & manganese systems — in the iron stage
Whirlpool WHCF-WHPLBB whole home housing
Waterite Excelpure PL10B30 housing
Express Water WH250SCS and other 4.5″ × 10″ whole house systems

Replacement for iSpring FM15B, Brio, Applied Membranes & PUREPLUS iron cartridges

Brand Iron cartridge it can replace Their cartridge
iSpring FM15B Iron & manganese reducing cartridge
Brio RFCTY4510IMR Iron & manganese · cation resin
Applied Membranes C-C4210-I Iron & manganese reducing cartridge
PUREPLUS RFN10BB-SZ Iron & manganese · resin granules

Switching from a softening or other iron cartridge

These same-size cartridges fit the same housing but are built for a different main job — see the fit questions.

Brand Cartridge Their cartridge
Aries AF-10-3003-BB Softening resin · rated 2,850 grains
US Water Systems USWF-4510-SF Softening resin · rated 2,800 grains
Pentek† RFFE10-BB (655005-43) Radial-flow iron reduction · up to 3 ppm dissolved iron

Also searched as: FM15B · RFCTY4510IMR · CC4210I · RFN10BB · iron filter 10×4.5 · iron and manganese filter cartridge · whole house iron filter big blue 10 inch

Check before you order. Your old cartridge should be about 4.5″ across and 9¾–10″ long, with an open center hole at both ends. Not sure? Send us a photo of the cartridge label and we’ll confirm the fit.

Iron plus rotten-egg odor? Resin doesn’t touch H₂S. Look at CATKDF85-10BB for low levels, or ask us — strong H₂S needs dedicated treatment.

Fit questions

Can I use IRON-10BB in place of the iSpring FM15B?

Yes. Both are 10″ × 4.5″ iron and manganese cartridges, so IRON-10BB fits the iron stage of the WGB21BM and WGB31BM. iSpring rates the FM15B for up to 3.0 ppm iron and 1.0 ppm manganese. IRON-10BB is a softening-type resin, so it works best on water that is also low in hardness — see “Is this a water softener?” below.

I use a Pentek RFFE10-BB. Can I switch?

It fits the same housing, but the media is different. The RFFE10-BB is a radial-flow iron cartridge rated for up to 3 ppm dissolved iron at pH above 7. IRON-10BB is cation-exchange resin: it also takes out some hardness, and that hardness uses up part of its capacity. On soft-to-moderate water with clear-water iron, it’s a good swap; on hard water, ask us first.

Is this a water softener?

No. It uses softening-type resin, but a 10″ cartridge holds very little of it. For reference, same-size softening cartridges are rated about 2,800 grains (Aries AF-10-3003-BB: 2,850; US Water USWF-4510-SF: 2,800). At 10 grains per gallon of hardness, that’s under 300 gallons before the hardness capacity is used up.

How do I know when to change it?

When orange staining or a metallic taste comes back, or every 2–6 months — sooner with more iron or harder water. Iron and hardness test strips at a tap after the filter show it earlier than the stains do.

My water comes out orange or rusty. Will this help?

No. Orange water means the iron has already oxidized into particles, which clog exchange resin. That needs an oxidizing or backwashing iron filter, with a sediment cartridge such as SED5-PLT-10BB to catch the particles.

Building a full stack?

Well water with clear-water iron
SED5-PLT-10BB washable sediment → IRON-10BB
Chlorinated water with iron
SED5-10BB → GAC-10BB carbon → IRON-10BB
Iron + scale on heaters
IRON-10BB → SCALE-10BB as the final stage
Iron + rotten-egg odor
Consider CATKDF85-10BB, or ask us — heavy H₂S needs dedicated treatment

Please note: Filter life and reduction performance depend on your water chemistry, pressure, and usage, so results vary from home to home. This product is not certified to treat water of unknown quality and is not a substitute for testing your water. Descriptions use general, qualified language and are not health claims. When in doubt, test your water or ask us and we’ll help you build the right stack.

† Big Blue® and Pentek® are registered trademarks of Pentair. My Water Club is not affiliated with, sponsored by or endorsed by Pentair. These names are used only to describe size and compatibility.

* American Plumber, Applied Membranes, Aries, Brio, Culligan, Express Water, GE, iSpring, PUREPLUS, 3M and Aqua-Pure, US Water Systems, Waterite and Whirlpool, and their model names, are trademarks of their respective owners. My Water Club is not affiliated with, sponsored by or endorsed by these companies, and this cartridge is not made by them. Brand and model names are used only to identify housings this cartridge fits and the same-size cartridges it can replace. Compatibility is based on the standard 10″ × 4.5″ size; please check your housing before ordering.

Additional information

Weight 5 lbs
Dimensions 10 × 5 × 5 in

Reviews

There are no reviews yet.

Be the first to review “Iron Reduction Water Filter Cartridge with Softening Resin, Heavy Duty BB 10″ × 4.5″, 25 Micron — Reduces Dissolved Iron, Manganese & Hardness”