Description
A catalytic carbon + KDF-85 filter in heavy-duty 10″ × 4.5″ (BB) size: catalytic carbon for chloramine and chlorine, plus copper-zinc KDF-85 media that helps reduce hydrogen sulfide (H₂S) odor and some heavy metals — two media in one cartridge.
What this catalytic carbon + KDF-85 filter does
This cartridge combines two media in one heavy-duty 10″ × 4.5″ shell. Catalytic carbon has a modified surface that speeds up the breakdown of chloramine — the chlorine-ammonia disinfectant many utilities use — and it also reduces regular chlorine, taste, and odor.
KDF-85 is a copper-zinc media that works by an oxidation-reduction (redox) reaction rather than adsorption. It’s the KDF grade made for hydrogen sulfide (H₂S) — the “rotten egg” odor — and it also helps reduce some heavy metals. In this cartridge it makes up about 15% of the media, with catalytic carbon making up the rest.
Run it after a sediment stage in a standard 10″ × 4.5″ (BB) housing. It’s the cartridge to choose when you have chloramine plus H₂S odor or metal concerns; if chloramine is the only issue, CAT-10BB is the simpler pick. It fits the same housings as other 10″ × 4.5″ carbon + KDF cartridges — see the compatibility list below.
Key benefits
- ✓ Catalytic carbon helps reduce chloramine & chlorine
- ✓ KDF-85 helps reduce hydrogen sulfide (H₂S) “rotten egg” odor
- ✓ KDF-85 also helps reduce some heavy metals
- ✓ Two media in one cartridge — one housing covers more
- ✓ Replaces same-size carbon + KDF cartridges from Aries, HydroLogic, APEC & more*
- ✓ Fits all My Water Club 10″ × 4.5″ systems & HOUSING10BB
Specifications
Helps reduce
What this cartridge targets — and what it isn’t built for.
Chlorine
Hydrogen sulfide (H₂S) odor
Some heavy metals
Taste & odor
Fine sediment
Fluoride
Red / rusty water
Scale / hardness
Dissolved solids (TDS)
Which 10″ × 4.5″ cartridge do I need?
The MyWaterClub heavy-duty 10″ × 4.5″ range by stage. Your current filter is highlighted — tap any other name to view it.
Browse all 10″ × 4.5″ BB cartridges & sets → · Specialty media →
Good to know before you buy
CATKDF85 vs. CAT — do you need the KDF? Both handle chloramine and chlorine. Choose this cartridge when H₂S odor or heavy-metal concerns are also in play. If chloramine alone is the issue, CAT-10BB has more catalytic carbon for that job and costs less.
Chloramine uses up catalytic carbon faster than chlorine. Reduction depends on contact time and the media’s capacity. For reference, a same-size cartridge that is all catalytic carbon (Aries AF-10-1042-BB) is rated 4,375 gallons for chloramine at 2 GPM; this one has about 15% less catalytic carbon. A whole-house line can pass that much in a few weeks, so change it on the short end of its life on chloraminated water, and for drinking water add point-of-use filtration at the tap.
Strong H₂S needs dedicated treatment. This cartridge helps with light-to-moderate rotten-egg odor. A heavily sulfurous well needs an oxidizing or aeration system — test your water first if the odor is strong.
Sediment first, flush on install. Keep a sediment cartridge (SED5-10BB) ahead of it, and run new media to drain a few minutes until the water clears.
Compatible housings & replacement cartridges
CATKDF85-10BB is a standard 10″ × 4.5″ catalytic carbon + KDF-85 cartridge, rated 25 micron. It fits the housings below and can replace the same-size cartridges listed after them.*
Housings & systems it fits
Replacement for catalytic carbon + KDF-85 cartridges
Switching from a standard GAC + KDF cartridge
These same-size cartridges pair KDF with regular (non-catalytic) carbon, or use KDF alone. CATKDF85-10BB fits the same housing and adds catalytic carbon for chloramine; most of them hold more KDF, so expect less KDF capacity from ours.
Also searched as: AF102213BB · AF-10-2212-BB · FIKDF8510BB · FG15BKS · KDF85 catalytic carbon 4.5 x 10 · KDF 85 big blue 10 inch · chloramine and H2S filter 10×4.5
Check before you order. Your old cartridge should be about 4.5″ across and 9¾–10″ long, with an open center hole at both ends. Not sure? Send us a photo of the cartridge label and we’ll confirm the fit.
Iron staining too? KDF-85 isn’t a full iron filter. Add IRON-10BB for clear-water iron.
Fit questions
Can I use CATKDF85-10BB in place of the Aries AF-10-2213-BB?
Yes. Both are 10″ × 4.5″ cartridges with catalytic carbon and KDF-85, so CATKDF85-10BB fits the same housing. The Aries cartridge holds 3 lb of KDF-85; ours holds about 1 lb (≈15% of the media) and more catalytic carbon, so it leans toward chloramine. If you bought the Aries cartridge mainly for H₂S or iron, start on a shorter change interval.
Will it fit my HydroLogic Pre-Evolution?
Yes. The Pre-Evolution uses a 10″ × 4.5″ KDF85 / catalytic carbon cartridge, the same size and media type. HydroLogic suggests replacing theirs every 7,500 gallons; use that as a starting point for ours too.
I have an iSpring WGB31B-KS or WGB21B-KS. Can I switch?
Yes. Put CATKDF85-10BB in the GAC + KDF stage (where the FG15B-KS goes). The difference: ours uses catalytic carbon, which is made for chloramine.
CATKDF85-10BB or CAT-10BB — which do I need?
Both reduce chloramine and chlorine. Choose this one when you also want help with H₂S odor or some heavy metals. If chloramine is the only issue, CAT-10BB has more catalytic carbon for that job and costs less.
Will it fix a strong rotten-egg smell from my well?
It helps at low-to-moderate levels. A strong smell needs an oxidation or aeration system ahead of any cartridge. If only the hot water smells, the cause is usually the water heater’s anode rod, not the water supply.
Building a full stack?
† Big Blue® and Pentek® are registered trademarks of Pentair. My Water Club is not affiliated with, sponsored by or endorsed by Pentair. These names are used only to describe size and compatibility.
KDF® is a registered trademark of KDF Fluid Treatment, Inc. and is named only to identify the media used in this cartridge.
* American Plumber, APEC, Aries, Culligan, Envig, Express Water, GE, GrowMax Water, HydroLogic, iFilters, iSpring, ResinTech, 3M and Aqua-Pure and WECO, and their model names, are trademarks of their respective owners. My Water Club is not affiliated with, sponsored by or endorsed by these companies, and this cartridge is not made by them. Brand and model names are used only to identify housings this cartridge fits and the same-size cartridges it can replace. Compatibility is based on the standard 10″ × 4.5″ size; please check your housing before ordering.









Reviews
There are no reviews yet.